Joist Hangers
Joist hangers are designed to provide support underneath the timber
beam, joist or rafter to provide a strong connection, to resist
downward force and to provide structural stability. Joist hangers are
made of pre-galvanised mild steel, but can also be ordered from
stainless steel. Depending on the load and and the type of the joist,
the joist hanger made from galvanised steel thickness 0.8mm to 3.0mm or
more.
Some joist hangers would work with masonry
walls. The joist hanger will keep your joists solidly and permanently
connected. If you install them properly, joist hangers will keep your
decks and floors strong as wood dries, twists, shrinks and ages.
Joist
hangers come in many sizes to support different cross dimensional sizes
of timber joists. The galvanized coating would allow the hanger to be
used outdoors. Most joist hangers are common face-mounting type, and
there are specialized hangers available for joists that run at an
angle. Joist hangers speeds up your construction time, so they are a
real bargain.
Wood to wood Joist Hangers
Face fixed joist hangers are provided with fixing holes to allow you to fix them to the face of the beam or wall. Some have longer legs that can be bent over or wrapped over the beam or the wall. These legs allow fixing from the top giving extra support. Face fixed joist hangers can be light duty or heavy duty.
tag_install.png)
Masonry Joist Hangers
Masonry joist hangers are usually welded for strength. They are designed to be placed either on top of a wall, or wrapped around the wall or fixed into a joint in the wall. The return adds additional lateral support by wrapping around the back of the masonry.
Saddle Joist Hangers
Welded Saddle hangers are designed to hang over both sides of a beam, joist or a wall in order to continue a joist line in the same direction.
Note:
- Choose the correct hanger that fits the joist. Do not use a larger hanger than the size of the joist.
- Fill all the holes in each joist hanger with the proper size nail. If the wrong nails are used at a joist hanger, it won't perform as intended. Nails matter. Don't use drywall screws to install joist hangers, as they don't have the toughness to support joist loads.
Choose subcategory or scroll down to see products
CHOOSE MANUFACTURERS
Brand: TECO
Model and Size: MINI - 44x97
Delivery Time: In stock, 1-2 days
44x97mm Woody Mini Joist Hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. Also available in stainless steel. The hanger includes a base tag that can significantly contribute to faster and more accurat..
£0.58
£0.70 inc VAT
Brand: TECO
Model and Size: MFM - 44x98
Delivery Time: In stock, 1-2 days
44mm x 98mm Multifunctional Mini Joist Hanger is a Face Fix Joist Hanger, produced from 1.2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 ..
£1.73
£2.08 inc VAT
Brand: TECO
Model and Size: TIJ-TI - 45x240mm
Delivery Time: In stock, 1-2 days
45x240mm Top Fix I-Joist Hanger is an innovative new backer free Joist Hanger to suit solid engineered wood products as well as I-Joists. It is engineered to combine maximum load carrying capacity with easy hands-free site installation, at minimum cost. Long term safe working load = ..
£1.69
£2.03 inc VAT
Brand: TECO
Model and Size: FHMR47X100R100
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.06
£3.67 inc VAT
Brand: TECO
Model and Size: FHMR47X100R115
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.31
£3.97 inc VAT
Brand: TECO
Model and Size: FHMR47X100R140
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.56
£4.27 inc VAT
Brand: TECO
Model and Size: FHMR47X100R150
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many special..
£3.56
£4.27 inc VAT
Brand: TECO
Model and Size: FHMR47X100R215
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.70
£4.44 inc VAT
Brand: TECO
Model and Size: FHM47/100
Delivery Time: In stock, 1-2 days
47mm x 100mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£1.80
£2.16 inc VAT
Brand: TECO
Model and Size: FHMR47X125R100
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many special..
£3.26
£3.91 inc VAT
Brand: TECO
Model and Size: FHMR47X125R115
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many special..
£3.50
£4.20 inc VAT
Brand: TECO
Model and Size: FHMR47X125R140
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.76
£4.51 inc VAT
Brand: TECO
Model and Size: FHMR47X125R150
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many special..
£3.76
£4.51 inc VAT
Brand: TECO
Model and Size: FHMR47X125R215
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.90
£4.68 inc VAT
Brand: TECO
Model and Size: FHM47/125
Delivery Time: In stock, 1-2 days
47mm x 125mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£1.99
£2.39 inc VAT
Brand: TECO
Model and Size: FHMR47X150R100
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.36
£4.03 inc VAT
Brand: TECO
Model and Size: FHMR47X150R115
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.60
£4.32 inc VAT
Brand: TECO
Model and Size: FHMR47X150R140
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.85
£4.62 inc VAT
Brand: TECO
Model and Size: FHMR47X150R150
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.85
£4.62 inc VAT
Brand: TECO
Model and Size: FHMR47X150R215
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£4.00
£4.80 inc VAT
Brand: TECO
Model and Size: MFT47/346BA - 47x150
Delivery Time: In stock, 1-2 days
47mm x 150mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base l..
£2.25
£2.70 inc VAT
Brand: TECO
Model and Size: FHM47/150
Delivery Time: In stock, 1-2 days
47mm x 150mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.54
£3.05 inc VAT
Brand: TECO
Model and Size: FHMR47X175R100
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.56
£4.27 inc VAT
Brand: TECO
Model and Size: FHMR47X175R115
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.80
£4.56 inc VAT
Brand: TECO
Model and Size: FHMR47X175R140
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£4.05
£4.86 inc VAT
Brand: TECO
Model and Size: FHMR47X175R150
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£4.05
£4.86 inc VAT
Brand: TECO
Model and Size: FHMR47X175R215
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£4.19
£5.03 inc VAT
Brand: TECO
Model and Size: FHM47/175
Delivery Time: In stock, 1-2 days
47mm x 175mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.28
£2.74 inc VAT
Brand: TECO
Model and Size: MFT47/404BA - 47x179
Delivery Time: In stock, 1-2 days
47mm x 179mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base l..
£2.58
£3.10 inc VAT
Brand: TECO
Model and Size: FHMR47X200R100
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.70
£4.44 inc VAT