Multifunctional Joist Hanger
Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M10 or M12 bolt holes, 19 x nail or screw holes. It can bolted, screwed, coach screwed or nailed.
FIXING INSTRUCTIONS Multifunctional Joist Hanger
- 30 x 3.75 Square Twisted nails are used for nailing the holes during installation to timber face.
- Can be bolted to masonry face with appropriate bolts.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.