14mm Standard Nylon Plug
14mm Standard Nylon Plug
Price: £0.31 (£0.37 inc VAT)
- Product Code: A1-5839
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: PNP14
Brand: TECO
Model: WTGP-225/50
Delivery Time: In stock, 1-2 days
225mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£14.20
£17.04 inc VAT
Brand: TECO
Model: WM50x200
Delivery Time: 2 - 4 days
50mm x 200mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£2.41
£2.89 inc VAT
Brand: TECO
Model: WM44x200
Delivery Time: 2 - 4 days
44mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£2.41
£2.89 inc VAT
Brand: TECO
Model: WM90x275
Delivery Time: 2 - 4 days
90mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£9.38
£11.26 inc VAT
Brand: TECO
Model: FHMR47X225R215
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£4.59
£5.51 inc VAT
Brand: TECO
Model: TFT75
Delivery Time: In stock, 1-2 days
75mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South E..
£0.33
£0.40 inc VAT