6mm Nylon Push Plug
6mm Nylon Push Plug
Price: £0.09 (£0.11 inc VAT)
- Product Code: A1-5842
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: PPP
Brand: TECO
Model: LL - 150x450
Delivery Time: In stock, 1-2 days
150x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support...
£6.36
£7.63 inc VAT
Brand: TECO
Model: FHM50/225
Delivery Time: In stock, 1-2 days
50mm x 225mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£26.63
£31.96 inc VAT
Brand: TECO
Model: PBERS6/12
Delivery Time: In stock, 1-2 days
Plaster depth 6-12mm uPVC Plaster External Render Stop Bell Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary...
£3.56
£4.27 inc VAT
Brand: TECO
Model: TCDS 38mm M10
Delivery Time: In stock, 1-2 days
Diameter: 38mmTeeth Size: 0.9mm38mm M10 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.29
£0.35 inc VAT
Brand: TECO
Model: WM63x250
Delivery Time: 2 - 4 days
63mm x 250mm Welded Masonry Joist Hanger is designed to support 250mm high timber joist. The joist hanger's actual height is 240mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£5.50
£6.60 inc VAT
Brand: TECO
Model: FHMR47X125R115
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many special..
£3.50
£4.20 inc VAT