8X2 Galvanised Expanded Metal Lath Sheet - 685x2438mm
8X2 Galvanised Expanded Metal Lath Sheet - 685x2438mm
Price: £7.20 (£8.64 inc VAT)
- Product Code: A1-5572
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: EML8x2
- Weight: 1,500.00g
8X2 Galvanised Expanded Metal Lath Sheet - 685x2438mm
Length: 2438mm
Width: 685mm
Weight: 1500g
Gauge: 0.4mm
Hole length: 20mm
Hole width: 10mm
8x2 Galvanised Expanded Metal Lath Sheet is mainly used for internal and external plaster when applied on suspended ceilings and walls. It is also suitable for encasing steel columns and beams, assisting in the protection from fire. Galvanised Steel EN 10346 DX51D Z275.
Hole width: 10mm Hole length: 20mm
Installation
- Fix with the long way of mesh running from support to support, with all strands sloping downwards and inwards from the face of the coating. Always ensure when fixing that allowance is made for overlapping sheets by 50mm lengthways and 25mm widthways.
- Timber Support - To connect to timber use plasterers nails & screws with washers or staples at 100mm centres. Start at the centre of the sheet and work out towards the edges. Always fix at an angle to allow lath to be pulled tight.
- Metal Support - To fix steel channels, tie with 1.2mm tying wire at 100mm centres. Tie by creating a hairpin shape with the wire, then pull tight and twist. Take care that cut wire ends are not close to plaster surface.
- To Solid Background - Expanded Metal Lath can be fixed to a solid background using a suitable fixing with an integral spacer/washer and a large diameter headed screw/nail that will keep the sheets firmly in place.
Note: Gloves should be worn as edges will be sharp. Ensure that compatible corrosion resistant fixings are used; i.e. do not use galvanised fixings with stainless products.
Brand: TECO
Model: WTGP-225/50
Delivery Time: In stock, 1-2 days
225mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirem..
£13.64
£16.37 inc VAT
Brand: TECO
Model: WM75x150
Delivery Time: 2 - 4 days
75mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber ..
£4.43
£5.32 inc VAT
Brand: TECO
Model: TDS150/25
Delivery Time: In stock, 1-2 days
150mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£17.56
£21.07 inc VAT
Brand: TECO
Model: PNP06
Delivery Time: In stock, 1-2 days
6mm Nylon Plug is a standard nylon plug for mm hole diameter and 40mm in length. Suitable for solid base materials. FeaturesAnchor hole size - 6mmPlug length - 40mmMin. anchor hole length - 45mmWood screw size - 3.5mm to 5mm ..
£0.04
£0.05 inc VAT
Brand: TECO
Model: PNP12
Delivery Time: In stock, 1-2 days
12mm Nylon Plug is a standard nylon plug for 12mm hole diameter and 60mm in length. Suitable for solid base materials. FeaturesAnchor hole size - 12mmPlug length - 60mmMin. anchor hole length - 75mmWood screw size - 8mm to 10mm ..
£0.25
£0.30 inc VAT
Brand: TECO
Model: WM50x275
Delivery Time: 2 - 4 days
50mm x 275mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or..
£4.74
£5.69 inc VATRelated Products
Brand: TECO
Model: NKG
Delivery Time: In stock, 1-2 days
30x3.75mm Galvanised Square Twist Nails are ideal for fixing Joist Hangers. The twisted shank gives greater pull out values than a standard round wire..
£4.50
£5.40 inc VAT
Brand: TECO
Model: HFR135
Delivery Time: In stock, 1-2 days
135mm Helical Flat Roof Fixing is a hammer driven fixing for securing composite panels to wooden battens. Bright zinc plated. For 70-95mm thick panels..
£0.50
£0.60 inc VAT
Model: 65mm - Free Delivery
Delivery Time: In stock, 1-2 days
65mm Staifix Insofast Anchor is a robust one-piece metal fastener designed to securely attach drywall and insulated plasterboard panels to walls. This..
£227.87
£273.44 inc VAT