63mm M10mm Galvanised Steel Double Sided Tooth Plate Timber Connector
63mm M10mm Galvanised Steel Double Sided Tooth Plate Timber Connector
Price: £0.73 (£0.88 inc VAT)
- Product Code: A1-5327
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: TCDS 63mm M10
- Weight: 28.00g
63mm M10mm Galvanised Steel Double Sided Tooth Plate Timber Connector
Weight: 28g
Diameter: 63mm
Teeth Size: 1.2mm
63mm M10 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-galvanised steel, in accordance to the BS EN 10327:2004 DX51D+Z275, but also available in stainless steel option. All sizes are suitable for standard M 12 holes size, but M10 and M16 are also available.
SPECIFICATION
All the products are manufactured in accordance with the BS EN 912:2000.
Brand: TECO
Model: TRS800B100
Delivery Time: In stock, 1-2 days
800mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to The..
£1.45
£1.74 inc VAT
Brand: TECO
Model: LD800F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 800mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£1.39
£1.67 inc VAT
Brand: TECO
Model: SVM
Delivery Time: In stock, 1-2 days
75mm Stainless Steel Soffit Vent Mesh is for use in new build properties. It is used over vents in soffits to allow air flow to prevent condensation but prevents access to birds and insects. Made from Grade 1.4301 Austenitic Stainless Steel to EN 10088-2. Gloves should be worn as edges may be sharp...
£78.51
£94.21 inc VAT
Brand: TECO
Model: TCSS 50mm M10
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm50mm M10 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.48
£0.58 inc VAT
Brand: TECO
Model: MFT63/346BA - 63x142
Delivery Time: In stock, 1-2 days
63mm x 142mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base l..
£2.25
£2.70 inc VAT
Brand: TECO
Model: WM63x300
Delivery Time: 2 - 4 days
63mm x 300mm Welded Masonry Joist Hanger is designed to support 300mm high timber joist. The joist hanger's actual height is 290mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£7.19
£8.63 inc VAT