Menu
Menu
Your Cart
Cart0 item(s) - £0.00

  • Your shopping cart is empty!

Call Back
Contact
Joist Hangers
Joist Hangers
stainless steel and galvanised metal lath sheets
restraint straps and bands

Galvanised Mini Mesh Bead 3m length

Galvanised Mini Mesh Bead 3m length
Rate this product
Galvanised Mini Mesh Bead 3m length
Price: £1.72 (£2.06 inc VAT)
  • Product Code: A1-5535
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: MMG3
  • Weight: 300.00g

Galvanised Mini Mesh Bead 3m length

Length: 3000mm
Width: 25mm
Height: 25mm
Weight: 300g

Galvanised Mini Mesh Beads are for internal thin-coat plaster applications. Mini Mesh Bead is used to reinforce and protect one-coat finish or plaster or corners at its weakest point on internal walls and plasterboard. The Mini Mesh bead had a greater area of expanded metal therefore gives a better mechanical key.

Specification 

  • Galvanised steel EN 10346 DX51D Z275..
Installation 
  • Use appropriate fixings.  
  • Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
490x375mm Gallows Bracket GB490 - pack of 2
Brand: TECO Model: GB490
Delivery Time: In stock, 1-2 days
490x375mm Gallows Bracket GB490 - pack of 2
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast..
£55.76
£66.91 inc VAT
150x127mm Multifunctional Joist Hanger
Brand: TECO Model: MFT150/404BA - 150x127
Delivery Time: In stock, 1-2 days
150x127mm Multifunctional Joist Hanger
150mm x 127mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base ..
£2.60
£3.12 inc VAT
63mm Galvanised Coiled Mesh Lath - 20m length
Brand: TECO Model: EMLG63
Delivery Time: In stock, 1-2 days
63mm Galvanised Coiled Mesh Lath - 20m length
63mm Galvanised Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. Specification Galvanised steel EN 10346 DX51D Z275, Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together...
£7.32
£8.78 inc VAT
50x150mm Heavy Duty Face Fix Joist Hanger
Brand: TECO Model: HWTNT50
Delivery Time: 2 - 3 Days
50x150mm Heavy Duty Face Fix Joist Hanger
50mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings.  The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONAl..
£4.53
£5.44 inc VAT
Helical Bar Grout HG3 - 3 Litres
Brand: TECO Model: HG3
Delivery Time: In stock, 1-2 days
Helical Bar Grout HG3 - 3 Litres
Helical Bar Grout is a high performance, non-shrink, non-gassing, thixotropic, cement based grout, suitable for injection with a hand or power applicator. It has a low liquid to powder ratio, which gives the thixotropic ability - the grout would flow sufficiently to form a uniform layer, then to res..
£64.34
£77.21 inc VAT
TRS Restraint Strap 1600mm Bent 100mm
Brand: TECO Model: TRS1600B100
Delivery Time: In stock, 1-2 days
TRS Restraint Strap 1600mm Bent 100mm
1600mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to Th..
£3.07
£3.68 inc VAT