Heavy Duty Restraint Strap 1200mm Bent 150mm
Heavy Duty Restraint Strap 1200mm Bent 150mm
Length: 1200mm
Width: 28mm
Thickness: 4mm
Weight: 1116g
Galvanised Heavy Duty Restraint Strap 1200mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.
APPLICATION
For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters.
SPECIFICATION
The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.
Brand: TECO
Model: TCDS 50mm M12
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm 50mm M12 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are ..
£0.34
£0.41 inc VAT
Brand: TECO
Model: TCW47
Delivery Time: In stock, 1-2 days
47mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
£0.31
£0.37 inc VAT
Brand: TECO
Model: TDS150/25
Delivery Time: In stock, 1-2 days
150mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£17.56
£21.07 inc VAT
Brand: TECO
Model: FHM47/200
Delivery Time: In stock, 1-2 days
47mm x 200mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.41
£2.89 inc VAT
Brand: TECO
Model: WT-225/250
Delivery Time: In stock, 1-2 days
225mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirement..
£36.11
£43.33 inc VAT
Brand: TECO
Model: HD1500B150
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1500mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APP..
£4.24
£5.09 inc VAT