Heavy Duty Restraint Strap 1800mm Bent 150mm
Heavy Duty Restraint Strap 1800mm Bent 150mm
Length: 1800mm
Width: 28mm
Thickness: 4mm
Weight: 1674g
Galvanised Heavy Duty Restraint Strap 1800mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.
APPLICATION
For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters
SPECIFICATION
The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.
Brand: TECO
Model: TDS100/25
Delivery Time: In stock, 1-2 days
100mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£10.48
£12.58 inc VAT
Brand: TECO
Model: PBPS6/8
Delivery Time: In stock, 1-2 days
Plaster depth 6-8mm uPVC Plaster Stop Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact resist..
£3.08
£3.70 inc VAT
Brand: TECO
Model: FRS75
Delivery Time: In stock, 1-2 days
75x75mm Repair Spike is used to repair a damaged or rotten post set into existing concrete. Galvanised steel, powder coated. Ideal for replacing broken posts set in concrete. Shoe height: 150mm, Support height: 300mm..
£10.86
£13.03 inc VAT
Brand: TECO
Model: WSS4x30
Delivery Time: In stock, 1-2 days
4x30mm Stainless Steel Wood screws - ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm diameter washer. Grade 1.4301 austenitic stainless steel to EN 10088-2. Screw directly into timber using a small pilot hole if require..
£21.40
£25.68 inc VAT
Brand: TECO
Model: MFM - 44x98
Delivery Time: In stock, 1-2 days
44mm x 98mm Multifunctional Mini Joist Hanger is a Face Fix Joist Hanger, produced from 1.2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 ..
£1.73
£2.08 inc VAT
Brand: TECO
Model: NUTFBZPM8
Delivery Time: In stock, 1-2 days
M8 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£6.86
£8.23 inc VAT