Helical Bar Grout HG3 - 3 Litres

Helical Bar Grout HG3 - 3 Litres
Price: £64.34 (£77.21 inc VAT)
  • Product Code: A1-5810
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: HG3

Helical Bar Grout HG3 - 3 Litres

Helical Bar Grout is a high performance, non-shrink, non-gassing, thixotropic, cement based grout, suitable for injection with a hand or power applicator. It has a low liquid to powder ratio, which gives the thixotropic ability - the grout would flow sufficiently to form a uniform layer, then to resist further flow, thereby preventing sagging on a vertical surface. This way, the grout would completely fills all voids into which it is injected and which develops its compressive strength rapidly. Helical Grout is suitable for bonding metal components into most common masonry type substrates including concrete, brick, stone, blocks, etc.

helical bar installation

Specification
  • Helical Grout is packed in tubs containing the dry powder and liquid, individually packed.
  • 3L tub would cover 10m.
Installation
  • It is important to make the correct size of hole to ensure a good bond.
  • A minimum clearance of 2mm all round should be allowed
  • A greater clearance being required with more absorbent materials.
  • The hole should be flushed out with clean water to obtain maximum bond strength.
  • Mix the Helical Grout by adding half of the powder to all of the liquid in the tub provided. Mix until blended.
  • Add the remaining powder and mix thoroughly, preferably using a powered mixing paddle for a minimum of two minutes.
  • Pour the mixture into the cartridge of the pointing gun and inject into the hole or slot in a continuous operation.
Do not add water or any additives.

Brand: TECO Model: CSHBZPM10x100
Delivery Time: In stock, 1-2 days
10mm - 100mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£12.91
£15.49 inc VAT
Brand: TECO Model: LL - 38x600
Delivery Time: In stock, 1-2 days
38x600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to  EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support. This joist hanger ls..
£4.08
£4.90 inc VAT
Brand: TECO Model: WM75x250
Delivery Time: 2 - 4 days
75mm x 250mm Welded Masonry Joist Hanger is designed to support 250mm high timber joist. The joist hanger's actual height is 240mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber ..
£5.50
£6.60 inc VAT
Brand: TECO Model: TRS1600B100
Delivery Time: In stock, 1-2 days
1600mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to The Building..
£3.07
£3.68 inc VAT
Brand: TECO Model: US5x40
Delivery Time: In stock, 1-2 days
5x40mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£9.09
£10.91 inc VAT
Brand: TECO Model: PBPS20/122
Delivery Time: In stock, 1-2 days
Plaster depth 20-22mm uPVC Plaster Stop Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact..
£4.09
£4.91 inc VAT