6mm Helical Bar Crack Stitching Kit - 1m length 5 bars
6mm Helical Bar Crack Stitching Kit - 1m length 5 bars
Price: £87.71 (£105.25 inc VAT)
- Product Code: A1-5830
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: H6/1000
- Weight: 2,000.00g
6mm Helical Bar Crack Stitching Kit - 1m length 5 bars
Length: 1000mm
Thickness: 6mm
Weight: 2000g
6mm Helical Bar is used in a variety of applications; in general the metre lengths are used for crack stitching and reinforcing masonry in both new and existing masonry structures. The deformation of the fins makes the bonding characteristics of the Helical Bar far superior to alternative standard reinforcing materials. Stainless steel grade 304 (grade 316 available on request).
The 6mm Stainless Steel Helical Bar Crack Stitching System is fully certified kit, that consists of the following elements.
- 5nos 6mm x 1000mm Helical Bars,
- 1no 1.5L tub of Helical Grout,
- 1no Crack Stitching Gun,
- 1no Black Plastic Nozzle,
- 1no Mixing Paddle,
- 1no Finger Trowel
Features
- Grade 304 austenitic stainless steel (grade 316 available to order).
- Excellent bonding capabilities.
- Coiled spring properties within elastic limit.
- High stress material.
- No sudden or catastrophic failure point.
- Less intrusive than standard repairs.
Installation
- Rake or cut slots into horizontal mortar joint to a depth of between 25-35mm and a 450mm or 6 brick courses vertical spacing.
- Vacuum out the slots and thoroughly flush with water.
- Mix the two part Grout (HG3) in the tub provided.
- Insert a bead of Grout into the back of the slot using a grout gun.
- Push the Helical Bar into the Grout to obtain good coverage.
- Insert a bead of Grout over the exposed Helical Bar and iron into the slot using a finger trowel. Fill in the slot with Grout leaving sufficient depth for re pointing.
- Use a colour matched mortar to repair fractured bricks.
- Re-point the slot to match existing as closely as possible and make good the area.
- If in doubt, seek advice from a structural engineer.
Brand: TECO
Model and Size: MFM - 76x82
Delivery Time: In stock, 1-2 days
76mm x 82mm Multifunctional Mini Joist Hanger is a Face Fix Joist Hanger, produced from 1.2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 ..
£1.73
£2.08 inc VAT
Brand: TECO
Model and Size: LL - 76x600
Delivery Time: In stock, 1-2 days
76mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produc..
£4.69
£5.63 inc VAT
Brand: TECO
Model and Size: WS75x225S100
Delivery Time: 2 - 4 days
Straddle: 100mm75mm x 225mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned..
£11.65
£13.98 inc VAT
Brand: TECO
Model and Size: CSHBZPM10x110
Delivery Time: In stock, 1-2 days
10mm - 110mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£13.88
£16.66 inc VAT
Brand: TECO
Model and Size: TIJ-TI - 50x240mm
Delivery Time: In stock, 1-2 days
50x240mm Top Fix I-Joist Hanger is an innovative new backer free Joist Hanger to suit solid engineered wood products as well as I-Joists. It is engineered to combine maximum load carrying capacity with easy hands-free site installation, at minimum cost. Long term safe working load = ..
£1.69
£2.03 inc VAT
Brand: TECO
Model and Size: TCW38
Delivery Time: In stock, 1-2 days
38mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
£0.31
£0.37 inc VAT
Related Products
Brand: TECO
Delivery Time: 999
Delivery Time: In stock, 1-2 days
6mm Helical Bar is used in a variety of applications; in general the metre lengths are used for crack stitching and reinforcing masonry in both new an..
£4.60
£5.52 inc VAT