50x240mm Top Fix I-Joist Hanger
50x240mm Top Fix I-Joist Hanger
Price: £1.69 (£2.03 inc VAT)
- Product Code: A1-5845
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: TIJ-TI - 50x240mm
- Weight: 288.00g
50x240mm Top Fix I-Joist Hanger
Width: 50mm
Height: 240mm
Thickness: 0.7mm
Weight: 288g
50x240mm Top Fix I-Joist Hanger is an innovative new backer free Joist Hanger to suit solid engineered wood products as well as I-Joists. It is engineered to combine maximum load carrying capacity with easy hands-free site installation, at minimum cost. Long term safe working load = 4.3 kN. Long term safe working load with enhanced nailing = 8.6 kN.
CHARACTERISTICS
- Unique hands free installation,
- Qualified for use with various nail types,
- Requires less nails,
- Face fix or top fix design,
- Enhanced load carrying option,
- Can be used on solid EWP or I-Joists.
FIXING INSTRUCTIONS for 50x240mm Top Fix I-Joist Hanger
- All standard round holes should be filled with either 2.65 x 40mm or 2.8 x 40mm or 3.4 x 35mm ring-shank nails or 3.75 x 30mm square twist nails.
- Fill diamond shaped holes for enhanced installation to I-Joist with backer blocks or solid LVL or Glulam headers.
- The TIJs unique hands free design locates the hanger on I-Joist headers leaving the installer with both hands free for easier installation.
SPECIFICATION
- 0.7mm pre galvanised mild steel EN 10346 DX51D Z275.
I-Joist-Hangers_data_sheet.pdf
Brand: TECO
Model: DPC100
Delivery Time: In stock, 1-2 days
100mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications. Specification500mu. Produced to BS 6515:84. Suitable for withstanding a compressive load ..
£3.39
£4.07 inc VAT
Brand: TECO
Model: FHMR47X125R140
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.76
£4.51 inc VAT
Brand: TECO
Model: HG3
Delivery Time: In stock, 1-2 days
Helical Bar Grout is a high performance, non-shrink, non-gassing, thixotropic, cement based grout, suitable for injection with a hand or power applicator. It has a low liquid to powder ratio, which gives the thixotropic ability - the grout would flow sufficiently to form a uniform layer, then to res..
£64.34
£77.21 inc VAT
Brand: TECO
Model: ERSG3
Delivery Time: In stock, 1-2 days
Galvanised External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used ..
£2.53
£3.04 inc VAT
Brand: TECO
Model: EB3x13
Delivery Time: In stock, 1-2 days
13mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape.Specification Galvanised steel EN 10346 DX51D Z275..Installation Use appropriate fixings..
£2.93
£3.52 inc VAT
Brand: TECO
Model: US6x80
Delivery Time: In stock, 1-2 days
6x80mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£13.70
£16.44 inc VAT