Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..

75mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..

Galvanised Light Duty Restraint Strap 200mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..

1200mm Ferritic Stainless Steel Wall Starter Kit joins new walls to existing masonry, suitable for both internal and external brick or block walls. The connectors can be slotted together up to a maximum of 8 metres or 3 storeys high, from 60 to 250mm thick. Made from Ferritic Stainless Steel (G..

4x30mm Stainless Steel Wood screws - ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm diameter washer. Grade 1.4301 austenitic stainless steel to EN 10088-2. Screw directly into timber using a small pilot hole if require..

16mm Stainless Steel Movement Mesh Beads are used to overcome movement tolerances in plaster and render finishes minimising racking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. 3m length.Installation Use ap..