3mm Galvanised Thin Coat Plaster Stop - 3m length
3mm Galvanised Thin Coat Plaster Stop - 3m length
Price: £3.84 (£4.61 inc VAT)
- Product Code: A1-5547
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: PSTCG3
- Weight: 370.00g
3mm Galvanised Thin Coat Plaster Stop - 3m length
Length: 3000mm
Width: 13mm
Weight: 370g
3mm Thin Coat Plaster Stop bead is for use on traditional wet 2 or 3 coat plaster application, it provides a precise, clean edge to render where it butts up to other materials such as a door or window frame, reinforcing the edges of the plaster. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern that drying out times may be extended, stainless steel or uPVC should be used.
Specification
- Galvanised steel EN 10346 DX51D Z275..
Installation
- Use appropriate fixings.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
Brand: TECO
Model and Size: HD1000F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1000mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£2.83
£3.40 inc VAT
Brand: TECO
Model and Size: TRS800B100
Delivery Time: In stock, 1-2 days
800mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to The..
£1.45
£1.74 inc VAT
Brand: TECO
Model and Size: FHM50/125
Delivery Time: In stock, 1-2 days
50mm x 125mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.07
£2.48 inc VAT
Brand: TECO
Model and Size: WM75x100
Delivery Time: 2 - 4 days
75mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£4.20
£5.04 inc VAT
Brand: TECO
Model and Size: TDS150/25
Delivery Time: In stock, 1-2 days
150mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£17.56
£21.07 inc VAT
Brand: TECO
Model and Size: PB6/10
Delivery Time: In stock, 1-2 days
Plaster depth 6-10mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact..
£3.43
£4.12 inc VAT