TECO
Brand: TECO
Model and Size: US6x80
Delivery Time: In stock, 1-2 days
6x80mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£13.70
£16.44 inc VAT
Brand: TECO
Model and Size: TIJ-TI - 74x240mm
Delivery Time: In stock, 1-2 days
74x240mm Top Fix I-Joist Hanger is an innovative new backer free Joist Hanger to suit solid engineered wood products as well as I-Joists. It is engineered to combine maximum load carrying capacity with easy hands-free site installation, at minimum cost. Long term safe working lo..
£1.88
£2.26 inc VAT
Brand: TECO
Model and Size: TAPEDW75
Delivery Time: In stock, 1-2 days
75mm wide professional internal plastering joint tapes. Open weave self-adhesive plasterers scrim tape is used for reinforcing joints and patching repairs on plasterboard. InstallationTapered drywall joints have special edges that provide a pocket for joint compound and tape.Mix the setti..
£6.36
£7.63 inc VAT
Brand: TECO
Model and Size: TDS75
Delivery Time: In stock, 1-2 days
75mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. Features 7mmHeat treated shank for extra strength. Green organic coating. Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£9.35
£11.22 inc VAT
Brand: TECO
Model and Size: TFT75
Delivery Time: In stock, 1-2 days
75mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South E..
£0.33
£0.40 inc VAT
Brand: TECO
Model and Size: SVM
Delivery Time: In stock, 1-2 days
75mm Stainless Steel Soffit Vent Mesh is for use in new build properties. It is used over vents in soffits to allow air flow to prevent condensation but prevents access to birds and insects. Made from Grade 1.4301 Austenitic Stainless Steel to EN 10088-2. Gloves should be worn as edges may be sharp...
£78.51
£94.21 inc VAT
Brand: TECO
Model and Size: WM75x100
Delivery Time: 2 - 4 days
75mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£4.20
£5.04 inc VAT
Brand: TECO
Model and Size: WM75x125
Delivery Time: 2 - 4 days
75mm x 125mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£4.21
£5.05 inc VAT
Brand: TECO
Model and Size: WM75x150
Delivery Time: 2 - 4 days
75mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.43
£5.32 inc VAT
Brand: TECO
Model and Size: WM75x175
Delivery Time: 2 - 4 days
75mm x 175mm Welded Masonry Joist Hanger is designed to support 175mm high timber joist. The joist hanger's actual height is 165mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.59
£5.51 inc VAT
Brand: TECO
Model and Size: WR75X200R100
Delivery Time: 2 - 4 days
75mm x 200mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£5.55
£6.66 inc VAT
Brand: TECO
Model and Size: WM75x200
Delivery Time: 2 - 4 days
75mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.86
£5.83 inc VAT
Brand: TECO
Model and Size: WS75x200S100
Delivery Time: 2 - 4 days
Straddle: 100mm75mm x 200mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned..
£11.41
£13.69 inc VAT
Brand: TECO
Model and Size: WR75X225R100
Delivery Time: 2 - 4 days
75mm x 225mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£5.65
£6.78 inc VAT
Brand: TECO
Model and Size: WS75x225S100
Delivery Time: 2 - 4 days
Straddle: 100mm75mm x 225mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned..
£11.65
£13.98 inc VAT
Brand: TECO
Model and Size: WM75x225
Delivery Time: 2 - 4 days
75mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.99
£5.99 inc VAT
Brand: TECO
Model and Size: WR75X250R100
Delivery Time: 2 - 4 days
75mm x 250mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£6.16
£7.39 inc VAT
Brand: TECO
Model and Size: WM75x250
Delivery Time: 2 - 4 days
75mm x 250mm Welded Masonry Joist Hanger is designed to support 250mm high timber joist. The joist hanger's actual height is 240mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£5.50
£6.60 inc VAT
Brand: TECO
Model and Size: WS75x250S100
Delivery Time: 2 - 4 days
Straddle: 100mm75mm x 250mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned..
£12.74
£15.29 inc VAT
Brand: TECO
Model and Size: WM75x275
Delivery Time: 2 - 4 days
75mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£6.18
£7.42 inc VAT
Brand: TECO
Model and Size: WNT - 75x295
Delivery Time: In stock, 1-2 days
75mm x 295mm Woody No Tag Joist Hanger is produced from 0.8mm thick pre-galvanised mild steel in accordance with the BS EN 10327:2004 DX51D+Z275 specifications. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request. Also available in Stainles..
£0.60
£0.72 inc VAT
Brand: TECO
Model and Size: WM75x300
Delivery Time: 2 - 4 days
75mm x 300mm Welded Masonry Joist Hanger is designed to support 300mm high timber joist. The joist hanger's actual height is 290mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£7.19
£8.63 inc VAT
Brand: TECO
Model and Size: FDT
Delivery Time: In stock, 1-2 days
Drive Tool for use with the Fence Spikes and Repair Spikes. ..
£6.26
£7.51 inc VAT
Brand: TECO
Model and Size: FEX75
Delivery Time: In stock, 1-2 days
75x75mm Galvanised powder coated Fence Post Extender. Ideal for joining two fence posts together. Hole size M10. Please note: The design changes from time to time without notice. Sometimes we get the extenders with the holes, sometimes with the slats. At the moment all we have ar..
£9.09
£10.91 inc VAT
Brand: TECO
Model and Size: FB75
Delivery Time: In stock, 1-2 days
75x75mm Galvanised steel, powder coated Bolt Down Shoe. A fence post supports in both standard and heavy duty. Hole size M10. InstallationTo bolt down onto existing concrete.Suggested fixing 10 x 80mm sleeve anchor...
£11.11
£13.33 inc VAT
Brand: TECO
Model and Size: FRS75
Delivery Time: In stock, 1-2 days
75x75mm Repair Spike is used to repair a damaged or rotten post set into existing concrete. Galvanised steel, powder coated. Ideal for replacing broken posts set in concrete. Shoe height: 150mm, Support height: 300mm..
£10.86
£13.03 inc VAT
Brand: TECO
Model and Size: FS75x600
Delivery Time: In stock, 1-2 days
75x75mm Spiked Post Shoe is used to hold fence posts above ground level, suitable for standard soil conditions. Galvanised and Powder Coated Brown colour. Shoe height: 150mm,Support height: 600mm..
£11.93
£14.32 inc VAT
Brand: TECO
Model and Size: FS75x700
Delivery Time: In stock, 1-2 days
75x75mm Spiked Post Shoe is used to hold fence posts above ground level, suitable for standard soil conditions. Galvanised and Powder Coated Brown colour. Shoe height: 150mm,Support height: 700mm..
£14.70
£17.64 inc VAT
Brand: TECO
Model and Size: TCDS 76mm M12
Delivery Time: In stock, 1-2 days
Diameter: 76mmTeeth Size: 1.2mm76mm M12 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£1.00
£1.20 inc VAT
Brand: TECO
Model and Size: TCSS 76mm M12
Delivery Time: In stock, 1-2 days
Diameter: 76mmTeeth Size: 1.2mm76mm M12 Single Sided Tooth Plate Timber Connectoris designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produce..
£1.16
£1.39 inc VAT