63x125mm Welded Masonry Joist Hanger
63x125mm Welded Masonry Joist Hanger
Price: £4.36 (£5.23 inc VAT)
- Product Code: A1-5105
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model: WM63x125
- Weight: 550.00g
63x125mm Welded Masonry Joist Hanger
Width: 63mm
Height: 125mm
Weight: 550g
63mm x 125mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or to steel beams using appropriate fixings. Long term safe working load = 3.5 kN.
Installation of 63x125mm Welded Masonry Joist Hanger
- The back plate of the hanger should lie flat against the vertical masonry support,
- The masonry flange should never be placed in dry slots,
- Masonry flange should have a minimum of 3 courses (675mm masonry) above,
- Use correct strength mortar as per British Standard,
- Both supporting and above masonry should be allowed to mature before any load is applied,
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm,
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent,
- To provide lateral restraint HD Straps should be used,
- Use appropriate corrosion resistant fixings. Do not use galvanised fixings with stainless steel products or vice versa.
Specification
- Pre Galvanised Steel S280GD+Z275
- Also available in Stainless Steel
Certification
- Manufactured to EN 845 - 1:2013.
- Galvanised steel to EN10346 DX51D Z275 or grade 1.4301 austenitic stainless steel to EN 10088 - 2.
- Tested by CERAM Research Ltd Notification Body No.1289.
Masonry-Hangers_data_sheet.pdf
Brand: TECO
Model: WM63x275
Delivery Time: 2 - 4 days
63mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber ..
£6.52
£7.82 inc VAT
Brand: TECO
Model: FHMR47X125R150
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many specials and..
£4.21
£5.05 inc VAT
Brand: TECO
Model: NP170x175
Delivery Time: In stock, 1-2 days
170x175mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropriate fixing..
£83.40
£100.08 inc VAT
Brand: TECO
Model: NUTFBZPM20
Delivery Time: In stock, 1-2 days
M20 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£19.31
£23.17 inc VAT
Brand: TECO
Model: WST
Delivery Time: In stock, 1-2 days
Stainless Steel Wall Starter systems WST join new walls to existing masonry, suitable for both internal and external brick or block walls. The connectors can be slotted together up to a maximum of 8 metres or 3 storeys high, from 60 to 250mm thick. Type WST is made from Austenitic Stainless Steel (G..
£11.08
£13.30 inc VAT
Brand: TECO
Model: WNT - 38x312
Delivery Time: In stock, 1-2 days
38mm x 312mm Woody No Tag Joist Hanger is produced from 0.8mm thick pre-galvanised mild steel in accordance with the BS EN 10327:2004 DX51D+Z275 specifications. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request. Also available in Stainles..
£0.61
£0.73 inc VAT