75mm Timber Frame Tie

75mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South East of England where basic wind speed does not exceed 44 m/s and for buildings on town and city sites in areas where the basic wind speed does not exceed 52 m/s. In more severe situations the tie density should be increased to 7 ties per square meter.

• Complies with a DD140 Type 6 tie.
• Meets with the appropriate parts of NHBC standards.
• Supplied with annular ring shank nails included. 

• Grade 1.4301 austenitic stainless steel to EN 10088-2.  
• Tested by CERAM Research Ltd.  

• Suitable at a density of 4.4 ties per square metre for buildings anywhere in the South East of England where the basic wind speed does not exceed 44 m/s and for buildings on town and city sites in areas where the basic wind speed does not exceed 52 m/s. In more severe situations the tie density should be increased to 7 ties per square metre