100x100mm Galvanised Steel Bolt Down Shoe

100x100mm Galvanised Steel Bolt Down Shoe
Price: £14.73 (£17.68 inc VAT)
- Product Code: A1-5693
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: FB100
- Weight: 1,450.00g
100x100mm Galvanised Steel Bolt Down Shoe
Length: 150mm
Width: 100mm
Height: 100mm
Weight: 1450g
100x100mm Galvanised steel, powder coated Bolt Down Shoe. A fence post supports in both standard and heavy duty. Hole size M10.

Installation
- To bolt down onto existing concrete.
- Suggested fixing 10 x 80mm sleeve anchor.
Brand: TECO
Model and Size: US5x40
Delivery Time: In stock, 1-2 days
5x40mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£9.09
£10.91 inc VAT
Brand: TECO
Model and Size: WM50x200
Delivery Time: 2 - 4 days
50mm x 200mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£2.41
£2.89 inc VAT
Brand: TECO
Model and Size: LL - 100x450
Delivery Time: In stock, 1-2 days
100x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support...
£4.76
£5.71 inc VAT
Brand: TECO
Model and Size: NP170x175
Delivery Time: In stock, 1-2 days
170x175mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropri..
£82.50
£99.00 inc VAT
Brand: TECO
Model and Size: GTS - 100x300
Delivery Time: In stock, 1-2 days
100mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significantly contribute to f..
£3.65
£4.38 inc VAT
Brand: TECO
Model and Size: MT200
Delivery Time: In stock, 1-2 days
200mm Movement Ties are designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction. The Debonding Sleeve is located over the embedment detail to allow the tie to move. Typical usages are in areas where masonry is restrained to Steelwork columns and ..
£13.00
£15.60 inc VAT