12mm Galvanised Movement Mesh Bead 3m length
12mm Galvanised Movement Mesh Bead 3m length
Length: 3000mm
Width: 12mm
Height: 12mm
Weight: 0.24g
12mm Galvanised Movement Mesh Beads are used to overcome movement tolerances in plaster and render finishes minimising racking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. 3m length.
Specification
- Galvanised steel EN 10346 DX51D Z275..
Installation
- Use appropriate fixings.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
Brand: TECO
Model: DWS25
Delivery Time: In stock, 1-2 days
3.5x25mm Drywall Screws are high quality screws designed for fixing plasterboard. Black phosphate finish. Features - 3.5mm Bugle head Sharp point.InstallationScrew directly into timber, no pre drilling required. ..
£9.58
£11.50 inc VAT
Brand: TECO
Model: ST150
Delivery Time: In stock, 1-2 days
Mild Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Zinc and yellow passivated mild steel. Threaded one end. Screw directly into timber using a small pilot hole if required. - 5mm..
£35.00
£42.00 inc VAT
Brand: TECO
Model: WM125x125
Delivery Time: 2 - 4 days
125mm x 125mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the tim..
£4.75
£5.70 inc VAT
Brand: TECO
Model: WSTDGM8
Delivery Time: In stock, 1-2 days
Diameter: 16mm M8 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£0.90
£1.08 inc VAT
Brand: TECO
Model: NP103x152
Delivery Time: In stock, 1-2 days
103x152mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropri..
£83.40
£100.08 inc VAT
Brand: TECO
Model: DPC600
Delivery Time: In stock, 1-2 days
600mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications. Specification500mu.Produced to BS 6515:84.Suitable for withstanding a compress..
£20.81
£24.97 inc VAT