Menu
Menu
Your Cart
Joist Hangers
Joist Hangers
stainless steel and galvanised metal lath sheets
restraint straps and bands

300ml Polyester Resin Tube

300ml Polyester Resin Tube
300ml Polyester Resin Tube
Price: £14.80 (£17.76 inc VAT)
  • Product Code: A1-5844
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: RESINPS

300ml Polyester Resin Tube

Width: 6mm
300mm Polyester Resin is designed to aid and add strength to anchors or fixings, threaded studs, internal threaded sockets and rebar. Can be used in brickwork, concrete and most natural stone. Supplied with mixer nozzle.
 
Features
  • Styrene free.
  • Expansion free.
  • Easy to dispense.
  • Close spacing and edge distance.
Installation
  • Drill the hole to the correct diameter and depth.
  • Thoroughly clean the hole.
  • Insert the mixer nozzle to the bottom of the hole.
  • Begin to extrude  the resin and slowly withdraw the mixer nozzle from the hole ensuring that there are no air voids as the mixer nozzle is withdrawn.
  • Fill the hole to approximately to full and remove the mixer nozzle completely.
  • Insert the clean threaded bar to the bottom of the hole using a back and forth twisting motion ensuring all the threads are thoroughly coated.
  • Any excess resin should be expelled from the hole evenly around the steel element and around the mouth of the hole before it sets.
  • Leave the anchor to cure.
  • Do not disturb the anchor until the appropriate loading/curing time has elapsed. 
Brand: TECO Model: MMG2.4
Delivery Time: In stock, 1-2 days
Galvanised Mini Mesh Beads are for internal thin-coat plaster applications. Mini Mesh Bead is used to reinforce and protect one-coat finish or plaster or corners at its weakest point on internal walls and plasterboard. The Mini Mesh bead had a greater area of expanded metal therefore gives a better ..
£1.30
£1.56 inc VAT
Brand: TECO Model: EB3x15
Delivery Time: In stock, 1-2 days
15mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape.Specification Galvanised steel EN 10346 DX51D Z275..Installation Use appropriate fixings..
£2.93
£3.52 inc VAT
Brand: TECO Model: HFR135/25
Delivery Time: In stock, 1-2 days
135mm Helical Flat Roof Fixing is a hammer driven fixing for securing composite panels to wooden battens. Bright zinc plated. For 70-95mm thick panels.  Features8mm diameter. Large 20mm head.Quick installation - no drilling, no need for screws. Unique one piece to prevent be..
£13.49
£16.19 inc VAT
Brand: TECO Model: WM150x225
Delivery Time: 2 - 4 days
150mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many t..
£9.21
£11.05 inc VAT
Brand: TECO Model: WSTDGM24
Delivery Time: In stock, 1-2 days
Diameter: 44mm M24 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£8.50
£10.20 inc VAT
Brand: TECO Model: HWTNT38
Delivery Time: 2 - 3 Days
38mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings.  The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONAl..
£4.18
£5.02 inc VAT