12x150 Zinc Plated Coach Bolt - Box of 10
12x150 Zinc Plated Coach Bolt - Box of 10
Price: £8.33 (£10.00 inc VAT)
- Product Code: A1-5626
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: CSHBZPM12x150
- Weight: 1,440.00g
12x150 Zinc Plated Coach Bolt - Box of 10
Length: 150mm
Weight: 1440g
12mm - 150mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009
Features
- Supplied complete with a hexagon full nut to suit.
- Available in bright zinc plated.
- Galvanised and stainless steel to order.
Installation
- Always ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa.
Brand: TECO
Model: ABLD
Delivery Time: In stock, 1-2 days
50x50mm Heavy duty angle bracket is a versatile, general purpose 90-degree bracket used to strengthen timer joists, roof trusses etc. SpecificationPre Galvanised Mild Steel SD280GD+Z275Fixing InstructionsThe TECO Angle Bracket is the ultimate angle cleat using either Bolts, Co..
£0.55
£0.66 inc VAT
Brand: TECO
Model: WM75x300
Delivery Time: 2 - 4 days
75mm x 300mm Welded Masonry Joist Hanger is designed to support 300mm high timber joist. The joist hanger's actual height is 290mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£7.19
£8.63 inc VAT
Brand: TECO
Model: HD1400F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1400mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£3.96
£4.75 inc VAT
Brand: TECO
Model: EMLG63
Delivery Time: In stock, 1-2 days
63mm Galvanised Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. Specification Galvanised steel EN 10346 DX51D Z275, Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together...
£6.64
£7.97 inc VAT
Brand: TECO
Model: TCSS 38mm M12
Delivery Time: In stock, 1-2 days
Diameter: 38mmTeeth Size: 0.9mm38mm M 12 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are ..
£0.33
£0.40 inc VAT
Brand: TECO
Model: MT200
Delivery Time: In stock, 1-2 days
200mm Movement Ties are designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction. The Debonding Sleeve is located over the embedment detail to allow the tie to move. Typical usages are in areas where masonry is restrained to Steelwork columns and ..
£13.00
£15.60 inc VAT