220mm Helical Flat Roof Fixings for 151-181mm panels - pack of 25
220mm Helical Flat Roof Fixings for 151-181mm panels - pack of 25
Price: £18.53 (£22.24 inc VAT)
- Product Code: A1-5759
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: HFR220
- Weight: 650.00g
220mm Helical Flat Roof Fixings for 151-181mm panels - pack of 25
Length: 220mm
Weight: 650g
220mm Helical Flat Roof Fixing is a hammer driven fixing for securing composite panels to wooden battens. Bright zinc plated. For 151-181mm thick panels.
Features
- 8mm diameter.
- Large 20mm head.
- Quick installation - no drilling, no need for screws.
- Unique one piece to prevent bending during installation.
- High performance.
- Minimal compression of insulation.
- Improved thermal bridging.
Installation
- Allow 24 nos Helical Flat Roof Fixings per panel.
-250x250.png "Heavy Duty Restraint Strap 1000mm Twisted 150mm")
Brand: TECO
Model and Size: HD1000T150
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1000mm Twisted 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres h..
£2.83
£3.40 inc VAT
Brand: TECO
Model and Size: WM50x225
Delivery Time: 2 - 4 days
50mm x 225mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£2.48
£2.98 inc VAT
Brand: TECO
Model and Size: LL - 38x600
Delivery Time: In stock, 1-2 days
38x600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
£4.19
£5.03 inc VAT
Brand: TECO
Model and Size: GTS - 100x300
Delivery Time: In stock, 1-2 days
100mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significantly contribute to f..
£3.65
£4.38 inc VAT
Brand: TECO
Model and Size: TRS600B100
Delivery Time: In stock, 1-2 days
600mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to The Building ..
£1.09
£1.31 inc VAT
Brand: TECO
Model and Size: GB375
Delivery Time: In stock, 1-2 days
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast is l..
£36.94
£44.33 inc VAT