305mm Galvanised Coiled Mesh Lath - 20m length
305mm Galvanised Coiled Mesh Lath - 20m length
Price: £39.96 (£47.95 inc VAT)
- Product Code: A1-5566
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: EMLG305
- Weight: 6,600.00g
305mm Galvanised Coiled Mesh Lath - 20m length
Length: 20000mm
Width: 305mm
Weight: 6600g
305mm Galvanised Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking.
Specification
- Galvanised steel EN 10346 DX51D Z275,
- Available in 20 metre coils
Installation
- Overlap by a minimum of 75mm when joining two lengths together.
- Gloves should be worn as edges will be sharp.
Brand: TECO
Model and Size: STUDBZPM8
Delivery Time: In stock, 1-2 days
M8 Bright Zinc Plated Studding ( threaded bar), suitable for many applications. Supplied as standard in mild steel, high tensile available to order. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stai..
£1.79
£2.15 inc VAT
Brand: TECO
Model and Size: FHMR47X150R150
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.85
£4.62 inc VAT
Brand: TECO
Model and Size: TCSS 76mm M12 SS
Delivery Time: In stock, 1-2 days
Diameter: 76mmTeeth Size: 1.2mmSingle Sided Stainless Steel Tooth Plate Timber Connector 76mm M12 is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity...
£3.44
£4.13 inc VAT
Brand: TECO
Model and Size: WM44x200
Delivery Time: 2 - 4 days
44mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£2.41
£2.89 inc VAT
Brand: TECO
Model and Size: LD900B100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 900mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset ..
£1.56
£1.87 inc VAT
Brand: TECO
Model and Size: WSTDGM24
Delivery Time: In stock, 1-2 days
Diameter: 44mm M24 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£8.50
£10.20 inc VAT