100mm Galvanised Coiled Mesh Lath - 20m length
100mm Galvanised Coiled Mesh Lath - 20m length
Price: £12.79 (£15.35 inc VAT)
- Product Code: A1-5563
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: EMLG100
- Weight: 1,360.00g
100mm Galvanised Coiled Mesh Lath - 20m length
100mm Galvanised Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking.
Specification
- Galvanised steel EN 10346 DX51D Z275,
- Available in 20 metre coils
Installation
- Overlap by a minimum of 75mm when joining two lengths together.
- Gloves should be worn as edges will be sharp.
Brand: TECO
Model: NUTFBZPM10
Delivery Time: In stock, 1-2 days
M10 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£14.85
£17.82 inc VAT
Brand: TECO
Model: WTGP-200/50
Delivery Time: In stock, 1-2 days
200mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£13.31
£15.97 inc VAT
Brand: TECO
Model: EB3x10
Delivery Time: In stock, 1-2 days
10mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape.Specification Galvanised steel EN 10346 DX51D Z275..Installation Use appropriate fixings..
£3.23
£3.88 inc VAT
Brand: TECO
Model: FHMR47X125R115
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many special..
£3.92
£4.70 inc VAT
Brand: TECO
Model: WR100X200R100
Delivery Time: 2 - 4 days
100mm x 200mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but ..
£5.70
£6.84 inc VAT
Brand: TECO
Model: FHM50/200
Delivery Time: In stock, 1-2 days
50mm x 200mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.55
£3.06 inc VAT