47x200mm - R140mm Masonry Return Hanger
47x200mm - R140mm Masonry Return Hanger
Price: £4.19 (£5.03 inc VAT)
- Product Code: A1-5739
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: FHMR47X200R140
- Weight: 613.00g
47x200mm - R140mm Masonry Return Hanger
Width: 47mm
Height: 200mm
Weight: 613g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x200mm - R140mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model: TBCSK6x100
Delivery Time: In stock, 1-2 days
6x100 Countersunk Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 75mm Drill Dia: 6mm Hole Depth Embedment: 10mmMax Fixture Thickness: 45mm Clearance Hol..
£49.46
£59.35 inc VAT
Brand: TECO
Model: GG - 80x550
Delivery Time: In stock, 1-2 days
80mm x 550mm Multi Truss Girder Hanger is a Heavy Duty Girder to Girder Hanger produced from 3mm thick mild steel, which is galvanised upon production. This hanger offers substantial safe working load of 29kN, meaning there is no fear of the hanger breaking off, if the given load is respec..
£63.06
£75.67 inc VAT
Brand: TECO
Model: FB75
Delivery Time: In stock, 1-2 days
75x75mm Galvanised steel, powder coated Bolt Down Shoe. A fence post supports in both standard and heavy duty. Hole size M10. InstallationTo bolt down onto existing concrete.Suggested fixing 10 x 80mm sleeve anchor...
£11.11
£13.33 inc VAT
Brand: TECO
Model: PB2/3
Delivery Time: In stock, 1-2 days
Plaster depth 2-3mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact resis..
£2.09
£2.51 inc VAT
Brand: TECO
Model: SHORTLEG - 50x210
Delivery Time: In stock, 1-2 days
50mm x 210mm Woody Short Leg Joist Hanger is produced from 1mm thick pre-galvanised mild steel produced in accordance to EN BS 10327:2004 DX51D+Z275. It has a shortened leg, and with a 50mm joist bearing. The hanger includes a base tag which can significantly contrib..
£0.78
£0.94 inc VAT
Brand: TECO
Model: EB3x13
Delivery Time: In stock, 1-2 days
13mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape.Specification Galvanised steel EN 10346 DX51D Z275..Installation Use appropriate fixings..
£2.93
£3.52 inc VAT