47x175mm - R100mm Masonry Return Hanger
47x175mm - R100mm Masonry Return Hanger
Price: £3.56 (£4.27 inc VAT)
- Product Code: A1-5732
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: FHMR47X175R100
- Weight: 528.00g
47x175mm - R100mm Masonry Return Hanger
Width: 47mm
Height: 175mm
Weight: 528g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x175mm - R100mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model: TPS/LD
Delivery Time: In stock, 1-2 days
An Eco Light Duty versatile multi purpose polythene sheet intended for a wide range of applications from protecting flooring and equipment through to temporary repairs. Made from recycled polythene, all sheets are waterproof and tear resistant and provide an excellent protective barrier within build..
£19.24
£23.09 inc VAT
Brand: TECO
Model: NUTFBZPM20
Delivery Time: In stock, 1-2 days
M20 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£19.31
£23.17 inc VAT
Brand: TECO
Model: CSHBZPM12x200
Delivery Time: In stock, 1-2 days
12mm - 200mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£11.16
£13.39 inc VAT
Brand: TECO
Model: HI200/3
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes. InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tiles so ..
£1.76
£2.11 inc VAT
Brand: TECO
Model: FC38
Delivery Time: In stock, 1-2 days
38mm Fencing Clip, a quick and easy way to secure fence panels and trellis to timber posts or plugged and screwed into masonry. Galvanised Steel EN 10346 DX51D Z275. ..
£0.39
£0.47 inc VAT
Brand: TECO
Model: WB30x5
Delivery Time: In stock, 1-2 days
30x5 galvanised steel water bar for fitting into door sills for weather protection. Edge coated galvanised steel EN 10346 DX51D Z600. Traditionally used with wooden doors, the water bar is fitted into the threshold so that the front door closes against it, sealing any gaps and preventing wind a..
£6.25
£7.50 inc VAT