47x175mm - R215mm Masonry Return Hanger
47x175mm - R215mm Masonry Return Hanger
Price: £4.69 (£5.63 inc VAT)
- Product Code: A1-5736
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: FHMR47X175R215
- Weight: 622.00g
47x175mm - R215mm Masonry Return Hanger
Width: 47mm
Height: 175mm
Weight: 622g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x175mm - R215mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model: AR12
Delivery Time: In stock, 1-2 days
300mm Arris Rail Bracket is suitable for securing arris rails to a square fence post when building a feather edge fence or to repair a broken wooden arris rail to an existing post. Made from galvanised steel EN 10346 DX51D Z275.Installation &nbs..
£1.20
£1.44 inc VAT
Brand: TECO
Model: WM50x100
Delivery Time: 2 - 4 days
50mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£2.01
£2.41 inc VAT
Brand: TECO
Model: WM125x200
Delivery Time: 2 - 4 days
125mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£5.46
£6.55 inc VAT
Brand: TECO
Model: TBFlange6x100
Delivery Time: In stock, 1-2 days
6x100 Flange Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (..
£48.31
£57.97 inc VAT
Brand: TECO
Model: GBCLIP175/50
Delivery Time: In stock, 1-2 days
175mm Galvanised Gravel Board Clip with lip for concrete for fitting gravel boards securely to concrete fence posts. Width 55mm. Made from Galvanised Steel EN 10346 DX51D Z275. ..
£1.70
£2.04 inc VAT
Brand: TECO
Model: CSHBZPM12x130
Delivery Time: In stock, 1-2 days
12mm - 130mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£7.15
£8.58 inc VAT