47x200mm - R100mm Masonry Return Hanger
47x200mm - R100mm Masonry Return Hanger
Price: £3.70 (£4.44 inc VAT)
- Product Code: A1-5737
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: FHMR47X200R100
- Weight: 587.00g
47x200mm - R100mm Masonry Return Hanger
Width: 47mm
Height: 200mm
Weight: 587g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x200mm - R100mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model: HD1300B100
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1300mm Bent 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APP..
£3.82
£4.58 inc VAT
Brand: TECO
Model: SRTCG 102mm
Delivery Time: In stock, 1-2 days
Diameter: 102mm102mm Galvanised Steel Split Ring Timber Connector is designed for heavy shear loads in timber to timber connections.The Split Ring with the bevelled inside and outside face makes it easier to insert in the pre-cut grooves and also gives greater load capacity.The Ring i..
£7.53
£9.04 inc VAT
Brand: TECO
Model: US4x40
Delivery Time: In stock, 1-2 days
4x40mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£6.46
£7.75 inc VAT
Brand: TECO
Model: WM63x200
Delivery Time: 2 - 4 days
63mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.73
£5.68 inc VAT
Brand: TECO
Model: WM44x100
Delivery Time: 2 - 4 days
44mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or..
£1.90
£2.28 inc VAT
Brand: TECO
Model: WS75x250S100
Delivery Time: 2 - 4 days
Straddle: 100mm75mm x 250mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned..
£12.74
£15.29 inc VAT