85x350mm Galvanised Nail Plate - box of 50
85x350mm Galvanised Nail Plate - box of 50
Price: £82.50 (£99.00 inc VAT)
- Product Code: A1-5760
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: NP85x350
- Weight: 6,840.00g
85x350mm Galvanised Nail Plate - box of 50
Length: 350mm
Width: 85mm
Weight: 6840g
85x350mm versatile plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275.
Installation
- Use appropriate fixings. Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
Brand: TECO
Model and Size: HD1600B150
Delivery Time: In stock, 1-2 days
Galvanised Heavyt Duty Restraint Strap 1600mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.AP..
£4.53
£5.44 inc VAT
Brand: TECO
Model and Size: HWTNT175
Delivery Time: 2 - 3 Days
175mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONA..
£10.13
£12.16 inc VAT
Brand: TECO
Model and Size: GB375
Delivery Time: In stock, 1-2 days
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast is l..
£36.94
£44.33 inc VAT
Brand: TECO
Model and Size: WM90x275
Delivery Time: 2 - 4 days
90mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£9.38
£11.26 inc VAT
Brand: TECO
Model and Size: LL - 76x450
Delivery Time: In stock, 1-2 days
76x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
£4.06
£4.87 inc VAT
Brand: TECO
Model and Size: CSHBZPM6x65
Delivery Time: In stock, 1-2 days
6mm - 65mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied compl..
£19.91
£23.89 inc VAT