85x175mm Galvanised Nail Plate - box of 50
85x175mm Galvanised Nail Plate - box of 50
Price: £33.00 (£39.60 inc VAT)
- Product Code: A1-5799
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: NPSTD85x175
- Weight: 6,650.00g
85x175mm Galvanised Nail Plate - box of 50
Length: 175mm
Width: 85mm
Weight: 6650g
85x175mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275.
Installation
- Use appropriate fixings. Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
Brand: TECO
Model: CSHBZPM10x220
Delivery Time: In stock, 1-2 days
10mm - 220mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£25.93
£31.12 inc VAT
Brand: TECO
Model: WM75x250
Delivery Time: 2 - 4 days
75mm x 250mm Welded Masonry Joist Hanger is designed to support 250mm high timber joist. The joist hanger's actual height is 240mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£5.50
£6.60 inc VAT
Brand: TECO
Model: ARM
Delivery Time: In stock, 1-2 days
200mm Mortice Arris Rail Bracket is used for attaching a standard arris rail to a concrete post. Made from galvanised steel EN 10346 DX51D Z275. The Arris rail bracket is hammered into the mortise hole on a concrete post to allow a new triangular Arris rail to be installed. This is the per..
£3.74
£4.49 inc VAT
Brand: TECO
Model: LL - 100x450
Delivery Time: In stock, 1-2 days
100x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support...
£4.76
£5.71 inc VAT
Brand: TECO
Model: WSTDGM8
Delivery Time: In stock, 1-2 days
Diameter: 16mm M8 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£0.89
£1.07 inc VAT
Brand: TECO
Model: LD1000T100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1000mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset c..
£1.74
£2.09 inc VAT