8X2 Stainless Steel Expanded Metal Lath Sheet - 700x2500mm
8X2 Stainless Steel Expanded Metal Lath Sheet - 700x2500mm
Price: £27.80 (£33.36 inc VAT)
- Product Code: A1-5573
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: EMLS8x2
- Weight: 1,500.00g
8X2 Stainless Steel Expanded Metal Lath Sheet - 700x2500mm
Length: 2500mm
Width: 700mm
Weight: 1500g
Gauge: 0.4mm
Hole length: 20mm
Hole width: 10mm
8x2 Stainless Steel Expanded Metal Lath Sheet is mainly used for internal and external plaster when applied on suspended ceilings and walls. It is also suitable for encasing steel columns and beams, assisting in the protection from fire. Made of Grade 1.4301 Austenitic Stainless Steel to EN 10088-2. Gauge: 0.4mm
Hole width: 10mm Hole length: 20mm
Installation
- Fix with the long way of mesh running from support to support, with all strands sloping downwards and inwards from the face of the coating. Always ensure when fixing that allowance is made for overlapping sheets by 50mm lengthways and 25mm widthways.
- Timber Support - To connect to timber use plasterers nails & screws with washers or staples at 100mm centres. Start at the centre of the sheet and work out towards the edges. Always fix at an angle to allow lath to be pulled tight.
- Metal Support - To fix steel channels, tie with 1.2mm tying wire at 100mm centres. Tie by creating a hairpin shape with the wire, then pull tight and twist. Take care that cut wire ends are not close to plaster surface.
- To Solid Background - Expanded Metal Lath can be fixed to a solid background using a suitable fixing with an integral spacer/washer and a large diameter headed screw/nail that will keep the sheets firmly in place.
Note: Gloves should be worn as edges will be sharp. Ensure that compatible corrosion resistant fixings are used; i.e. do not use galvanised fixings with stainless products.
Brand: TECO
Model and Size: WM100x275
Delivery Time: 2 - 4 days
100mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£9.38
£11.26 inc VAT
Brand: TECO
Model and Size: LL - 44x600
Delivery Time: In stock, 1-2 days
44mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produc..
£4.03
£4.84 inc VAT
Brand: TECO
Model and Size: FHM47/150
Delivery Time: In stock, 1-2 days
47mm x 150mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.54
£3.05 inc VAT
Brand: TECO
Model and Size: FHMR47X100R140
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.56
£4.27 inc VAT
Brand: TECO
Model and Size: MT200
Delivery Time: In stock, 1-2 days
200mm Movement Ties are designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction. The Debonding Sleeve is located over the embedment detail to allow the tie to move. Typical usages are in areas where masonry is restrained to Steelwork columns and ..
£13.00
£15.60 inc VAT
Brand: TECO
Model and Size: TRS1200B100
Delivery Time: In stock, 1-2 days
1200mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to Th..
£2.18
£2.62 inc VAT
Related Products
Brand: TECO
Model and Size: WSS4x20
Delivery Time: In stock, 1-2 days
4x20mm Stainless Steel Wood screws - ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm..
£44.38
£53.26 inc VAT
Model and Size: 65mm - Free Delivery
Delivery Time: In stock, 1-2 days
65mm Staifix Insofast Anchor is a robust one-piece metal fastener designed to securely attach drywall and insulated plasterboard panels to walls. This..
£227.87
£273.44 inc VAT