Menu
Menu
Your Cart
Joist Hangers
Joist Hangers
stainless steel and galvanised metal lath sheets
restraint straps and bands

600mm Damp Proof Course - DPC

600mm Damp Proof Course - DPC
600mm Damp Proof Course - DPC
Price: £20.65 (£24.78 inc VAT)
  • Product Code: A1-5643
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model and Size: DPC600
  • Weight: 7,000.00g
Show other widths

600mm Damp Proof Course - DPC

Length: 30000mm
Width: 600mm
Weight: 7000g
600mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications.

 
 
Specification
  • 500mu.
  • Produced to BS 6515:84.
  • Suitable for withstanding a compressive load of up to 2.5 N/mm2 as long as no lateral load is applied.
Installation
  • Installation should be according to the code of practice CP102:1973 and normal DPC good practice procedures set in BS 5628 should be followed.
  • For internal walls, DPC should be installed at the base of load bearing walls and linked with any adjoining DPM.
  • The DPC should be at least the width the partition it is applied to and lapped by at least 100mm when two DPCs are joined and linked with any adjoining DPM. 
    Brand: TECO Model and Size: DS8x2
    Delivery Time: In stock, 1-2 days
    Exterior Wood Screw with a green organic coating for a longer life. Ideal for decking and all outdoor applications. FeaturesDiameter - 4mmHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber using a small pi..
    £21.06
    £25.27 inc VAT
    Add to Cart
    Brand: TECO Model and Size: GG - 80x550
    Delivery Time: In stock, 1-2 days
    80mm x 550mm Multi Truss Girder Hanger is a Heavy Duty Girder to Girder Hanger produced from 3mm thick mild steel, which is galvanised upon production. This hanger offers substantial safe working load of 29kN, meaning there is no fear of the hanger breaking off, if the given load is respec..
    £63.06
    £75.67 inc VAT
    Add to Cart
    Brand: TECO Model and Size: LL - 90x450
    Delivery Time: In stock, 1-2 days
    90x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to  EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
    £4.76
    £5.71 inc VAT
    Add to Cart
    Brand: TECO Model and Size: TDS150/50
    Delivery Time: In stock, 1-2 days
    150mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications.  FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
    £35.11
    £42.13 inc VAT
    Add to Cart
    Brand: TECO Model and Size: FHM50/125
    Delivery Time: In stock, 1-2 days
    50mm x 125mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
    £2.07
    £2.48 inc VAT
    Add to Cart
    Brand: TECO Model and Size: WTGP-200/250
    Delivery Time: In stock, 1-2 days
    200mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
    £67.31
    £80.77 inc VAT
    Add to Cart