Galvanised Skim Angle Bead 3m length (Thin coat)
Galvanised Skim Angle Bead 3m length (Thin coat)
Length: 2400mm
Weight: 540g
Galvanised Skim Angle Bead is for use on plasterboard or aerated blocks. Designed for standard single coat plasterwork for internal thin-coat plaster application, used to reinforce and protect plaster on corners and reveals at its weakest points.
Specification
- Galvanised steel EN 10346 DX51D Z275..
Installation
- Use appropriate fixings.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
Brand: TECO
Model: WM75x175
Delivery Time: 2 - 4 days
75mm x 175mm Welded Masonry Joist Hanger is designed to support 175mm high timber joist. The joist hanger's actual height is 165mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber ..
£4.59
£5.51 inc VAT
Brand: TECO
Model: TCSS 50mm M10
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm50mm M10 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-gal..
£0.50
£0.60 inc VAT
Brand: TECO
Model: WS63x200S100
Delivery Time: 2 - 4 days
Straddle: 100mm63mm x 200mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned dire..
£11.93
£14.32 inc VAT
Brand: TECO
Model: GTS - 76x300
Delivery Time: In stock, 1-2 days
76mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significantly contribute to fa..
£3.33
£4.00 inc VAT
Brand: TECO
Model: MFM - 50x95
Delivery Time: In stock, 1-2 days
50mm x 95mm Multifunctional Mini Joist Hanger is a Face Fix Joist Hanger, produced from 1.2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nai..
£1.82
£2.18 inc VAT
Brand: TECO
Model: MMINI - 50x65
Delivery Time: In stock, 1-2 days
50x65mm Mini Mini Joist Hanger is a timber to timber joist hanger suitable for light duty applications such as trimmers, ceiling joists and decking. The hanger is produced from 1mm thick pre-galvanised mild steel. The tag on the base of the hanger helps avoid rotation and aids fast, accurate locatio..
£0.53
£0.64 inc VAT
