Menu
Menu
Your Cart
Joist Hangers
Joist Hangers
stainless steel and galvanised metal lath sheets
restraint straps and bands

900mm x 50m Galvanised Steel Hex mesh Netting

900mm x 50m Galvanised Steel Hex mesh Netting
900mm x 50m Galvanised Steel Hex mesh Netting
Price: £52.73 (£63.28 inc VAT)
  • Product Code: A1-5574
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: HM900
  • Weight: 14,000.00g

900mm x 50m Galvanised Steel Hex mesh Netting

Length: 50000mm
Width: 900mm
Weight: 14000g

Galvanised Hex mesh Netting is used for floor screed reinforcement, wall plaster reinforcement and roof insulation. Also can be used for fencing. Made from hot dipped galvanised steel prior to weaving. Gloves should be worn as edges will be sharp.

Hex mesh is formed by twisting two adjacent wires at least four times, forming a strong honeycomb mesh structure. It has a high strength and durability. Even if a place is cut off, it will not lead to the entire hex mesh structure destroyed.  Hex mesh is more acceptable for plastering than welded wire mesh or expanded metal. This mesh effectively prevents plaster layer drying out and cracking.

Its hexagonal shape prevents the formation of internal stresses. It is convenient for mounting on curved and angled surfaces. Hex mesh is perfectly suited for reinforcement plastering, waterproofing, leveling floors and render work.




Brand: TECO Model: LL - 44x600
Delivery Time: In stock, 1-2 days
44mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to  EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produc..
£4.03
£4.84 inc VAT
Brand: TECO Model: HWTNT150
Delivery Time: 2 - 3 Days
150mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings.  The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONA..
£10.13
£12.16 inc VAT
Brand: TECO Model: TCSS 50mm M16
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm50mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.48
£0.58 inc VAT
Brand: TECO Model: TCW38
Delivery Time: In stock, 1-2 days
38mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
£0.31
£0.37 inc VAT
Brand: TECO Model: MFT90/504BA - 90x207
Delivery Time: In stock, 1-2 days
90mm x 207mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It inclu..
£3.05
£3.66 inc VAT
Brand: TECO Model: FHM50/100
Delivery Time: In stock, 1-2 days
50mm x 100mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£1.80
£2.16 inc VAT