Heavy Duty Restraint Strap 1600mm Bent 150mm Twisted 100mm

Heavy Duty Restraint Strap 1600mm Bent 150mm Twisted 100mm
Price: £4.70 (£5.64 inc VAT)
- Product Code: A1-5417
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: HD1600B150T
- Weight: 1,536.00g
Heavy Duty Restraint Strap 1600mm Bent 150mm Twisted 100mm
Length: 1600mm
Width: 28mm
Thickness: 4mm
Weight: 1536g
Galvanised Heavyt Duty Restraint Strap 1600mm Bent 150mm Twisted 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.
APPLICATION
For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters.
SPECIFICATION
The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.
Brand: TECO
Model and Size: PBERS6/12
Delivery Time: In stock, 1-2 days
Plaster depth 6-12mm uPVC Plaster External Render Stop Bell Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary...
£3.56
£4.27 inc VAT
Brand: TECO
Model and Size: WM63x200
Delivery Time: 2 - 4 days
63mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.73
£5.68 inc VAT
Brand: TECO
Model and Size: WR50X225R100
Delivery Time: 2 - 4 days
50mm x 225mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£4.70
£5.64 inc VAT
Brand: TECO
Model and Size: WM75x175
Delivery Time: 2 - 4 days
75mm x 175mm Welded Masonry Joist Hanger is designed to support 175mm high timber joist. The joist hanger's actual height is 165mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.59
£5.51 inc VAT
Brand: TECO
Model and Size: TCSS 38mm M12
Delivery Time: In stock, 1-2 days
Diameter: 38mmTeeth Size: 0.9mm38mm M 12 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are ..
£0.33
£0.40 inc VAT
Brand: TECO
Model and Size: TFT50
Delivery Time: In stock, 1-2 days
50mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South E..
£0.30
£0.36 inc VAT