Herringbone Joist Strut - 450mm centres
Herringbone Joist Strut - 450mm centres
Price: £0.48 (£0.58 inc VAT)
- Product Code: A1-5590
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: HB450
- Weight: 119.00g
Herringbone Joist Strut - 450mm centres
Length: 523mm
Weight: 119g
Herringbone Joist Strut HB450 provides the means to prevent sideways movement or the buckling of joists, a simple alternative to the labour intensive traditional timber noggins. Made from galvanised steel EN 10346 DX51D Z275. Joint centres - 400mm, Strut length - 480mm. Meets bracing requirements for long span domestic floors. In the interest of safety all corners are rounded. Only three sizes are needed to suit all standard nominal joist centres. Only two fixings per end are required.
Installation
- Generally required in the centre of the span when floor joists exceed 2.5 metres.
- Where spans exceed 4.5 metres two rows will be required at 1/3 and 2/3 of span.
- Holes should be nailed using 30 x 3.75 square twist nails or equivalent screws.
Brand: TECO
Model: WSQPBZPM12
Delivery Time: In stock, 1-2 days
M12 Bright Zinc plated Square Plate Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. Thickness 3mm. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not u..
£17.50
£21.00 inc VAT
Brand: TECO
Model: LL - 44x600
Delivery Time: In stock, 1-2 days
44mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produc..
£4.03
£4.84 inc VAT
Brand: TECO
Model: HWTNT76
Delivery Time: 2 - 3 Days
76mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONAl..
£4.49
£5.39 inc VAT
Brand: TECO
Model: PSTCG3
Delivery Time: In stock, 1-2 days
3mm Thin Coat Plaster Stop bead is for use on traditional wet 2 or 3 coat plaster application, it provides a precise, clean edge to render where it butts up to other materials such as a door or window frame, reinforcing the edges of the plaster. In external applications and where there is regul..
£3.84
£4.61 inc VAT
Brand: TECO
Model: ERSG3
Delivery Time: In stock, 1-2 days
Galvanised External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used ..
£2.53
£3.04 inc VAT
Brand: TECO
Model: LD900B100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 900mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset ..
£1.56
£1.87 inc VAT