Light Duty Restraint Strap 800mm Twisted 100mm
Light Duty Restraint Strap 800mm Twisted 100mm
Price: £1.39 (£1.67 inc VAT)
- Product Code: A1-5383
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: LD800T100
- Weight: 406.00g
Light Duty Restraint Strap 800mm Twisted 100mm
Length: 800mm
Width: 28mm
Thickness: 2.4mm
Weight: 406g
Galvanised Light Duty Restraint Strap 800mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.
SPECIFICATION
The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.
Straps can be ordered to any length up to 15m.
Restraint-Straps.pdf
Brand: TECO
Model and Size: LL - 125x600
Delivery Time: In stock, 1-2 days
125mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produ..
£5.73
£6.88 inc VAT
Brand: TECO
Model and Size: TRS1200B100
Delivery Time: In stock, 1-2 days
1200mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to Th..
£2.18
£2.62 inc VAT
Brand: TECO
Model and Size: HI300P
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes. InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tiles so ..
£1.94
£2.33 inc VAT
Brand: TECO
Model and Size: WM150x200
Delivery Time: 2 - 4 days
150mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many t..
£8.81
£10.57 inc VAT
Brand: TECO
Model and Size: WSTDGM8
Delivery Time: In stock, 1-2 days
Diameter: 16mm M8 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£0.89
£1.07 inc VAT
Brand: TECO
Model and Size: FHM47/175
Delivery Time: In stock, 1-2 days
47mm x 175mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.28
£2.74 inc VAT