Light Duty Restraint Strap 1000mm Twisted 100mm
Light Duty Restraint Strap 1000mm Twisted 100mm
Price: £1.74 (£2.09 inc VAT)
- Product Code: A1-5355
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: LD1000T100
- Weight: 508.00g
Light Duty Restraint Strap 1000mm Twisted 100mm
Length: 1000mm
Width: 28mm
Thickness: 2.4mm
Weight: 508g
Galvanised Light Duty Restraint Strap 1000mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.
SPECIFICATION
The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.
Straps can be ordered to any length up to 15m.
Restraint-Straps.pdf
Brand: TECO
Model and Size: TRS1200B100
Delivery Time: In stock, 1-2 days
1200mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to Th..
£2.18
£2.62 inc VAT
Brand: TECO
Model and Size: EMLG63
Delivery Time: In stock, 1-2 days
63mm Galvanised Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. Specification Galvanised steel EN 10346 DX51D Z275, Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together...
£6.64
£7.97 inc VAT
Brand: TECO
Model and Size: LL - 76x450
Delivery Time: In stock, 1-2 days
76x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
£4.06
£4.87 inc VAT
Brand: TECO
Model and Size: ERSS3
Delivery Time: In stock, 1-2 days
Stainless Steel External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used ..
£4.91
£5.89 inc VAT
Brand: TECO
Model and Size: WM63x300
Delivery Time: 2 - 4 days
63mm x 300mm Welded Masonry Joist Hanger is designed to support 300mm high timber joist. The joist hanger's actual height is 290mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£7.19
£8.63 inc VAT
Brand: TECO
Model and Size: TCSS 76mm M16
Delivery Time: In stock, 1-2 days
Diameter: 76mmTeeth Size: 1.2mm76mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£1.38
£1.66 inc VAT