38x100mm Mini Girder Truss Shoe
38x100mm Mini Girder Truss Shoe
Price: £1.06 (£1.27 inc VAT)
- Product Code: A1-13
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MGTS - 38x100
- Weight: 211.00g
38x100mm Mini Girder Truss Shoe
Width: 38mm
Height: 100mm
Thickness: 1.2mm
Weight: 211g
38mm x100mm Mini Girder Truss Shoe is a Face Fix Timber Hanger with a 85mm bearing and substantial safe working load of 5.25kN. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The TECO Mini Girder Truss Shoe is for short span, mono or in-fill trusses 100mm deep. The hanger has base tag that would significantly contribute to faster and more accurate installation and help to avoid unnecessary rotation.
SPECIFICATION
- Face Fix Timber Hanger,
- Tag on the base of the hanger helps avoid rotation and aids fast, accurate location,
- The Tag can easily be bent if not required.
- Bearing 85mm,
- Safe Working Load 5.25kN,
- Pre Galvanised Mild Steel to BS EN 10327:2004 DX51D+Z275
- Also available in Stainless Steel.
- Tested by Ceram Research.
FIXING INSTRUCTIONS
All holes should be nailed using 30 x 3.75 square twist nails or equivalent.
Girder-Hangers_data_sheet.pdf
Brand: TECO
Model: LL - 50x600
Delivery Time: In stock, 1-2 days
50mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The product also off..
£4.08
£4.90 inc VAT
Brand: TECO
Model: ABG3
Delivery Time: In stock, 1-2 days
Angle Bead is used to provide a true, straight corner which protects and reinforces a 2 or 3 coat plaster or render application in its most vulnerable area. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern that drying out times ..
£1.59
£1.91 inc VAT
Brand: TECO
Model: FHM47/200
Delivery Time: In stock, 1-2 days
47mm x 200mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using appropr..
£2.55
£3.06 inc VAT
Brand: TECO
Model: WM50x250
Delivery Time: 3 - 5 days
50mm x 250mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or..
£4.51
£5.41 inc VAT
Brand: TECO
Model: TCSS 38mm M12
Delivery Time: In stock, 1-2 days
Diameter: 38mmTeeth Size: 0.9mm38mm M 12 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-ga..
£0.35
£0.42 inc VAT
Brand: TECO
Model: LD600F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 600mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centre..
£1.10
£1.32 inc VAT