Light Duty Restraint Strap 600mm Flat

Light Duty Restraint Strap 600mm Flat
Price: £1.10 (£1.32 inc VAT)
  • Product Code: A1-5378
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: LD600F
  • Weight: 305.00g
Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Quantity

Galvanised Light Duty Restraint Strap 600mm Flat

Length: 600mm
Width: 28mm
Thickness: 2.5mm
Weight: 305g

Galvanised Light Duty Restraint Strap 600mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

Please note: 1-3 metre lengths come from a coil rather than a solid rigid bar. The physical characteristics of the metal mean that after a certain length they can bend rather than being flat rigid. It is not a question of any fault but rather the ‘nature of the beast’. The phrase: “straps are flat” is not misleading! It means they are not bent or twisted; at no point is there any claim that they are straight and true. Strap material is edge-coat galvanised which is required by the standard. This process, and the fact that the material is a coil does cause deflection, and the longer the length the more it is apparent.

Brand: TECO Model: WS63x225S100
Delivery Time: 2 - 4 days
Straddle: 100mm63mm x 225mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned dire..
£12.17
£14.60 inc VAT
Brand: TECO Model: WSTDGM24
Delivery Time: In stock, 1-2 days
Diameter: 44mm M24 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£8.10
£9.72 inc VAT
Brand: TECO Model: FFCPG150
Delivery Time: In stock, 1-2 days
100mm Galvanised Fishtailed Frame Cramp is traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in galva..
£0.35
£0.42 inc VAT
Brand: TECO Model: FBS
Delivery Time: In stock, 1-2 days
20mm wide versatile multi purpose banding that can be cut, bent and formed for all types of light applications. Grade 1.4301 austenitic stainless steel to EN 10088-2. 0.7mm thick. Holes: 3.75, M10 round, M10 & M8 square. The square holes are suitable for cup square hex (coach bolt..
£54.99
£65.99 inc VAT
Brand: TECO Model: WM90x125
Delivery Time: 2 - 4 days
90mm x 125mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or..
£4.62
£5.54 inc VAT
Brand: TECO Model: WT-275/250
Delivery Time: In stock, 1-2 days
275mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from up to 150mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirements of BS EN ..
£72.00
£86.40 inc VAT