200mm Movement Tie with Sleeve - pack of 10
200mm Movement Tie with Sleeve - pack of 10
Price: £13.00 (£15.60 inc VAT)
- Product Code: A1-5526
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MT200
- Weight: 610.00g
200mm Movement Tie with Sleeve - pack of 10
Length: 200mm
Width: 19mm
Weight: 610g
200mm Movement Ties are designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction. The Debonding Sleeve is located over the embedment detail to allow the tie to move. Typical usages are in areas where masonry is restrained to Steelwork columns and in long spans of brickwork where movement joints are required. 200mm ties can also be ordered without a sleeve.
Features
- Movement Ties come complete with sleeve.
- Additional sleeves available to order.
Specification
- Grade 1.4301 austenitic stainless steel to EN 10088-2.
Installation
- These products are designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction. The Debonding Sleeve is located over the embedment detail to allow the tie to move
Brand: TECO
Model: TSR 102mm
Delivery Time: In stock, 1-2 days
102mm Split Ring Grooving Tool to cut precision grooves or recesses (daps) for Split Ring and Shear Plate Connectors. The tools consist of a pilot, cutting blades and a depth gauge and can be used with a standard portable drill or drill press. SpecificationManufactured from tool steel.InstallationUs..
£770.00
£924.00 inc VAT
Brand: TECO
Model: NPSTD85x175
Delivery Time: In stock, 1-2 days
85x175mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropria..
£33.60
£40.32 inc VAT
Brand: TECO
Model: TCSS 50mm M12 SS
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mmSingle Sided Stainless Steel Tooth Plate Timber Connector 50mm M12 is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. ..
£3.12
£3.74 inc VAT
Brand: TECO
Model: GB375
Delivery Time: In stock, 1-2 days
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast is l..
£36.94
£44.33 inc VAT
Brand: TECO
Model: WM90x250
Delivery Time: 2 - 4 days
90mm x 250mm Welded Masonry Joist Hanger is designed to support 250mm high timber joist. The joist hanger's actual height is 240mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£6.70
£8.04 inc VAT
Brand: TECO
Model: WNT - 38x312
Delivery Time: In stock, 1-2 days
38mm x 312mm Woody No Tag Joist Hanger is produced from 0.8mm thick pre-galvanised mild steel in accordance with the BS EN 10327:2004 DX51D+Z275 specifications. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request. Also available in Stainles..
£0.61
£0.73 inc VAT