60x40mm Angle Bracket - 62mm width
60x40mm Angle Bracket - 62mm width
Price: £0.88 (£1.06 inc VAT)
- Product Code: A1-5222
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: AB60
- Weight: 99.00g
60x40mm Angle Bracket - 62mm width
Length: 60mm
Width: 62mm
Height: 40mm
Thickness: 2.4mm
Weight: 99g
60x40mm Heavy duty angle bracket is a versatile, general purpose 90-degree bracket used to strengthen timer joists, roof trusses etc.
Specification
Pre Galvanised Mild Steel SD280GD+Z275
Fixing Instructions
The TECO Angle Bracket is the ultimate angle cleat using either Bolts, Coach Screws, Nails, Screws or a combination of all three for greater strength and reliability.
Also available also in Stainless Steel.
Angle_Brackets_datasheet.pdf
Brand: TECO
Model: HG3
Delivery Time: In stock, 1-2 days
Helical Bar Grout is a high performance, non-shrink, non-gassing, thixotropic, cement based grout, suitable for injection with a hand or power applicator. It has a low liquid to powder ratio, which gives the thixotropic ability - the grout would flow sufficiently to form a uniform layer, then to res..
£64.34
£77.21 inc VAT
Brand: TECO
Model: LL - 150x450
Delivery Time: In stock, 1-2 days
150x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support...
£6.36
£7.63 inc VAT
Brand: TECO
Model: FHMR47X100R215
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.70
£4.44 inc VAT
Brand: TECO
Model: FHMR47X200R115
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.94
£4.73 inc VAT
Brand: TECO
Model: WM63x125
Delivery Time: 2 - 4 days
63mm x 125mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£4.14
£4.97 inc VAT
Brand: TECO
Model: SVM
Delivery Time: In stock, 1-2 days
75mm Stainless Steel Soffit Vent Mesh is for use in new build properties. It is used over vents in soffits to allow air flow to prevent condensation but prevents access to birds and insects. Made from Grade 1.4301 Austenitic Stainless Steel to EN 10088-2. Gloves should be worn as edges may be sharp...
£78.51
£94.21 inc VAT