47x225mm Single Piece Masonry Hanger
47x225mm Single Piece Masonry Hanger
Price: £2.56 (£3.07 inc VAT)
- Product Code: A1-5282
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: FHM47/225
- Weight: 566.00g
47x225mm Single Piece Masonry Hanger
Width: 47mm
Height: 225mm
Thickness: 2.4mm
Weight: 566g
47mm x 225mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using appropriate fixings. The straight top flange and a lock plate allows the hanger to be transformed into a straddle or a hook over, with no special equipment required. Long term safe working load = 5.4 kN.
FIXING INSTRUCTIONS for 47x225mm Single Piece Masonry Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent. Stainless steel hangers shouldbe nailed using 30 x 3.75 annular ring shank nails.
- To provide lateral restraint HD straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dryslots.
- Use appropriate fixings.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainlesssteel products or vice versa.
- Use correct strength mortar as per British Standard.
SPECIFICATION
- Galvanised steel to EN 10346 DX51D Z600.
- Tested by CERAM Research Ltd Notification Body No.1289.
- Manufactured to EN 845-1:2013.
Masonry-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: EMLS63
Delivery Time: In stock, 1-2 days
63mm Stainless Steel Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. SpecificationGalvanised steel EN 10346 DX51D Z275,Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together.Gl..
£18.50
£22.20 inc VAT
Brand: TECO
Model and Size: FHMR47X125R115
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many special..
£3.50
£4.20 inc VAT
Brand: TECO
Model and Size: WM150x225
Delivery Time: 2 - 4 days
150mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many t..
£9.21
£11.05 inc VAT
Brand: TECO
Model and Size: FFCPG250
Delivery Time: In stock, 1-2 days
200mm Galvanised Fishtailed Frame Cramp is traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in ..
£0.46
£0.55 inc VAT
Brand: TECO
Model and Size: TCSS 76mm M16
Delivery Time: In stock, 1-2 days
Diameter: 76mmTeeth Size: 1.2mm76mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£1.38
£1.66 inc VAT
Brand: TECO
Model and Size: MFM - 100x70
Delivery Time: In stock, 1-2 days
Multifunctional Mini Joist Hanger 100 x 70mm is one of 1.6mm Face Fix Joist Hangers, available in five different sizes with a 86mm bearing. The hanger is produced from pre-galvanised mild steel thickness of only 1,6mm, all in accordance with the specification given in the BS EN 10327:2004 ..
£1.73
£2.08 inc VAT