Stainless Steel Screw in Frame Tie - box of 100

38mm x100mm Mini Girder Truss Shoe is a Face Fix Timber Hanger with a 85mm bearing and substantial safe working load of 5.25kN. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The TECO Mini Girder Truss Sh..

Galvanised Light Duty Restraint Strap 1200mm Bent 100mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry and also for horizontal restraint. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed ..

Diameter: 20mm M10 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required.  InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use gal..

Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be ..

100mm x 250mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but ..

Galvanised Heavy Duty Restraint Strap 800mm Bent 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APPL..