100mm Stainless Steel Frame Cramp
100mm Stainless Steel Frame Cramp
Price: £0.88 (£1.06 inc VAT)
- Product Code: A1-5709
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: FFCS150
- Weight: 70.00g
100mm Stainless Steel Frame Cramp
Length: 100mm
Width: 19mm
Thickness: 2mm
Weight: 70g
100mm Stainless Steel Frame Cramp is traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in Grade 1.4301 austenitic stainless steel to EN 10088-2 with safety end.
Features
- 44mm upstand for easy fixing.
- Two 6mm holes and one 9mm hole.
Installation
- Use appropriate fixings.
- Always ensure that compatible corrosion resistant fixings are used i.e. do not use galvanised fixings with stainless steel products or vice versa.
Brand: TECO
Model: US5x60
Delivery Time: In stock, 1-2 days
5x60mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£11.76
£14.11 inc VAT
Brand: TECO
Model: TCSS 76mm M16
Delivery Time: In stock, 1-2 days
Diameter: 76mmTeeth Size: 1.2mm76mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£1.38
£1.66 inc VAT
Brand: TECO
Model: FHM47/225
Delivery Time: In stock, 1-2 days
47mm x 225mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.56
£3.07 inc VAT
Brand: TECO
Model: NUTFBZPM16
Delivery Time: In stock, 1-2 days
M16 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£22.08
£26.50 inc VAT
Brand: TECO
Model: WNT - 100x277
Delivery Time: In stock, 1-2 days
100mm x 277mm Woody No Tag Joist Hanger is produced from 0.8mm thick pre-galvanised mild steel in accordance with the BS EN 10327:2004 DX51D+Z275 specifications. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request.Also available in Stainles..
£0.60
£0.72 inc VAT
Brand: TECO
Model: LD1000F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1000mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.S..
£1.74
£2.09 inc VAT