50x300mm Girder Truss Shoe
50x300mm Girder Truss Shoe
Price: £2.24 (£2.69 inc VAT)
- Product Code: A1-5025
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: GTS - 50x300
- Weight: 297.00g
50x300mm Girder Truss Shoe
Width: 50mm
Height: 300mm
Thickness: 1.2mm
Weight: 297g
50mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significantly contribute to faster and more accurate installation and to avoid unnecessary rotation. This base tag can easily be bent where necessary. The girder shoe offers long term safe working load of 7.27kN at 1.5mm deflection. The Girder Truss Shoes have been tested by Ceram Research - the test results are available upon request.
SPECIFICATION
- Especially designed for supporting trussed rafters,
- Tag on the base of the hanger helps avoid rotation and aids fast, accurate location,
- The Tag can easily be bent if not required.
- Bearing 85mm,
- Safe Working Load 7.55kN,
- Pre Galvanised Mild Steel to BS EN 10327:2004 DX51D+Z275
- Also available in Stainless Steel.
- Tested by Ceram Research.
It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
Girder-Hangers_data_sheet.pdf
Brand: TECO
Model: CSHBZPM12x260
Delivery Time: In stock, 1-2 days
12mm - 260mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£37.13
£44.56 inc VAT
Brand: TECO
Model: HWTNT225
Delivery Time: 2 - 3 Days
225mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONA..
£12.05
£14.46 inc VAT
Brand: TECO
Model: US4x50
Delivery Time: In stock, 1-2 days
4x50mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£7.19
£8.63 inc VAT
Brand: TECO
Model: AB150/90
Delivery Time: In stock, 1-2 days
150x90mm Heavy duty angle bracket is a versatile, general purpose 90-degree bracket used to strengthen timer joists, roof trusses etc. SpecificationPre Galvanised Mild Steel SD280GD+Z275Fixing InstructionsThe TECO Angle Bracket is the ultimate angle cleat using either Bolts, C..
£1.40
£1.68 inc VAT
Brand: TECO
Model: TCDS 38mm M10
Delivery Time: In stock, 1-2 days
Diameter: 38mmTeeth Size: 0.9mm38mm M10 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.29
£0.35 inc VAT
Brand: TECO
Model: MBS3x16
Delivery Time: In stock, 1-2 days
16mm Stainless Steel Movement Mesh Beads are used to overcome movement tolerances in plaster and render finishes minimising racking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. 3m length.Installation Use ap..
£22.31
£26.77 inc VAT