90mm Handed Arris Rail Brackets (Bolt on Type) - pair
90mm Handed Arris Rail Brackets (Bolt on Type) - pair
Price: £3.75 (£4.50 inc VAT)
- Product Code: A1-5481
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: ARH
- Weight: 410.00g
90mm Handed Arris Rail Brackets (Bolt on Type) - pair
Width: 190mm
Weight: 410g
90mm Handed Arris Rail Brackets are suitable for fitting plain unended Arris rails to blank posts. Made from galvanised steel EN 10346 DX51D Z275.
This Arris rail support bracket allows a triangular Arris rail to be attached to a post without the need for a mortise hole in the post or the rail being ended to slot into that hole. They are quick and easy to fit. You can move the rails up and down the post to position them where you need them. You rest the Arris rail down into the bracket and attach it with just a single screw, which could allow for a relatively quick removal. These brackets are handed left or right.
Sold in pairs
Brand: TECO
Model: DS8x2.5
Delivery Time: In stock, 1-2 days
Exterior Wood Screw with a green organic coating for a longer life. Ideal for decking and all outdoor applications. FeaturesDiameter - 4mmHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber using a small pi..
£8.96
£10.75 inc VAT
Brand: TECO
Model: MMINI - 47x67
Delivery Time: In stock, 1-2 days
47x67mm Mini Mini Joist Hanger is a timber to timber joist hanger suitable for light duty applications such as trimmers, ceiling joists and decking. The hanger is produced from 1mm thick pre-galvanised mild steel. The tag on the base of the hanger helps avoid rotation and aids fast, accurate lo..
£0.53
£0.64 inc VAT
Brand: TECO
Model: WM63x300
Delivery Time: 2 - 4 days
63mm x 300mm Welded Masonry Joist Hanger is designed to support 300mm high timber joist. The joist hanger's actual height is 290mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£7.19
£8.63 inc VAT
Brand: TECO
Model: LD300F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 300mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£0.53
£0.64 inc VAT
Brand: TECO
Model: TCDS 50mm M16
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm50mm M16 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.48
£0.58 inc VAT
Brand: TECO
Model: SBG3
Delivery Time: In stock, 1-2 days
Galvanised Skim Angle Bead is for use on plasterboard or aerated blocks. Designed for standard single coat plasterwork for internal thin-coat plaster application, used to reinforce and protect plaster on corners and reveals at its weakest points.Specification Galvanised steel EN 10346 DX51..
£1.64
£1.97 inc VAT