uPVC Arch Bead - plaster depth 2-3mm
uPVC Arch Bead - plaster depth 2-3mm
Price: £2.53 (£3.04 inc VAT)
- Product Code: A1-5552
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: PBAR2/3
- Weight: 280.00g
uPVC Arch Bead - plaster depth 2-3mm
Length: 2500mm
Weight: 280g
Plaster depth 2-3mm uPVC Plaster Arch Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact resistant dry lining and wet plaster beads for internal or external use. uPVC Bead is supplied as standard in white, although many colours are available upon request by supplying us with the relevant RAL reference code.
Characteristics
- Plaster depth 2 to 3mm
- Simple installation (with plaster dabs or stainless steel fixings),
- No sharp edges, and safe to handle,
- Easy to cut,
- Non corrosive.
Brand: TECO
Model: LL - 47x450
Delivery Time: In stock, 1-2 days
47x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
£3.36
£4.03 inc VAT
Brand: TECO
Model: WM75x175
Delivery Time: 2 - 4 days
75mm x 175mm Welded Masonry Joist Hanger is designed to support 175mm high timber joist. The joist hanger's actual height is 165mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.59
£5.51 inc VAT
Brand: TECO
Model: PSG3x13
Delivery Time: In stock, 1-2 days
13mm Plaster Stop bead is for use on traditional wet 2 or 3 coat plaster application, it provides a precise, clean edge to render where it butts up to other materials such as a door or window frame, reinforcing the edges of the plaster. In external applications and where there is regular exposu..
£2.48
£2.98 inc VAT
Brand: TECO
Model: WM75x275
Delivery Time: 2 - 4 days
75mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£6.18
£7.42 inc VAT
Brand: TECO
Model: MB3x12
Delivery Time: In stock, 1-2 days
12mm Galvanised Movement Mesh Beads are used to overcome movement tolerances in plaster and render finishes minimising racking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. 3m length.Specification Galvanised..
£21.35
£25.62 inc VAT
Brand: TECO
Model: TFT50
Delivery Time: In stock, 1-2 days
50mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South E..
£0.30
£0.36 inc VAT