Galvanised External Render Stop (Bell Bead) - 2.4m
Galvanised External Render Stop (Bell Bead) - 2.4m
Price: £2.08 (£2.50 inc VAT)
- Product Code: A1-5538
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: ERSG2.4
- Weight: 450.00g
Galvanised External Render Stop (Bell Bead) - 2.4m
Length: 2400mm
Weight: 450g
Galvanised External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used in sheltered areas only, stainless steel for all other areas including coastal. Plaster depth 16 to 20mm, wing dimension 45mm.
Specification
- Galvanised steel EN 10346 DX51D Z275..
Installation
- Use appropriate fixings.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
Brand: TECO
Model: WTGP-200/250
Delivery Time: In stock, 1-2 days
200mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£67.31
£80.77 inc VAT
Brand: TECO
Model: CSHBZPM8x50
Delivery Time: In stock, 1-2 days
8mm - 50mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied compl..
£19.30
£23.16 inc VAT
Brand: TECO
Model: GTS - 63x300
Delivery Time: In stock, 1-2 days
63mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significan..
£3.33
£4.00 inc VAT
Brand: TECO
Model: LL - 150x600
Delivery Time: In stock, 1-2 days
150mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produ..
£7.74
£9.29 inc VAT
Brand: TECO
Model: EMLS100
Delivery Time: In stock, 1-2 days
100mm Stainless Steel Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. SpecificationGalvanised steel EN 10346 DX51D Z275,Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together.G..
£28.41
£34.09 inc VAT
Brand: TECO
Model: TCSS 76mm M12
Delivery Time: In stock, 1-2 days
Diameter: 76mmTeeth Size: 1.2mm76mm M12 Single Sided Tooth Plate Timber Connectoris designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produce..
£1.16
£1.39 inc VAT