uPVC External Render Stop Bell Bead - Render depth 6-12mm

uPVC External Render Stop Bell Bead - Render depth 6-12mm
Price: £3.56 (£4.27 inc VAT)
- Product Code: A1-5553
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: PBERS6/12
- Weight: 450.00g
uPVC External Render Stop Bell Bead 6-12mm
Length: 2500mm
Weight: 450g
Plaster depth 6-12mm uPVC Plaster External Render Stop Bell Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact resistant dry lining and wet plaster beads for internal or external use. uPVC Bead is supplied as standard in white, although many colours are available upon request by supplying us with the relevant RAL reference code. This is an external render stop bell bead which is curved at the edge and does not have a 90 degree angle.
Characteristics
- Plaster depth 6 to 12mm,
- Simple installation (with plaster dabs or stainless steel fixings),
- No sharp edges, and safe to handle,
- Easy to cut,
- Non corrosive.
Brand: TECO
Model and Size: FFCPG250
Delivery Time: In stock, 1-2 days
200mm Galvanised Fishtailed Frame Cramp is traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in ..
£0.46
£0.55 inc VAT
Brand: TECO
Model and Size: TBHEX10x60
Delivery Time: In stock, 1-2 days
10x60 Hex Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (Fix..
£35.69
£42.83 inc VAT
Brand: TECO
Model and Size: WM50x275
Delivery Time: 2 - 4 days
50mm x 275mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£4.49
£5.39 inc VAT
Brand: TECO
Model and Size: WSTDGM12
Delivery Time: In stock, 1-2 days
Diameter: 24mm M12 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use gal..
£1.81
£2.17 inc VAT
Brand: TECO
Model and Size: LD250F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 250mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£0.61
£0.73 inc VAT
Brand: TECO
Model and Size: TRS1200B100
Delivery Time: In stock, 1-2 days
1200mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to Th..
£2.18
£2.62 inc VAT